Polyester resin topcoat with hardener | HP-P21TC
Polyester resin topcoat with hardener | HP-P21TC
The LSE Polyester Laminating System HP-P21LSP is an unfilled, low-viscous combination of resin and hardener.Technical data:
| Mixed viscosity (at 20°C) : | Thixotropic |
| Pot life (at 20°C): | 15 - 20 Minutes |
| Demouldable: | 24 hours |
| Cured: | 48 hours |
Hazards Identification
Areas of applications:
Swimming pool, pond construction and boat building, ...
Properties and application notes:
Areas of applications:
Swimming pool, pond construction and boat building, ...
Properties and application notes:
- High-quality, unsaturated polyester gelcoat based on ISO/NPG
- Thixotropic, non-adhesive curing airside (waxy)
- Cobalt pre-accelerated
- Slightly higher elasticity (semi-flexible and therefore less damage on the laminate)
- High UV stability, excellent weather resistance
- Good chemical and hydrolysis resistance for swimming pool and boat building
- viscosity set for manual application
Delivery conditions
Product data HP-P21L
Hazards Identification
Unfortunately, we have to restrict the article because of a change in the law in the Chemical Prohibition Ordinance (ChemVerbotsV).
A dispatch of this article is only possible if the following basics are met:
Professional use public research, study or educational institutions reseller
If you meet one of the above criteria, we kindly ask you to contact us by e-mail, fax or post. After successful examination you can buy this article on revocation from us.
Individuals:
This article can only be from people over 18 years old. Please make an appointment by phone or e-mail. We are happy to provide you with the article in Schapen.
For further inquiries, we are happy to help you.
Your HP-Textiles team
Working notes and decision guidance for Polyester Resins
Working instructions for polyester resin systemsPond and pool construction with polyester resins