Subscribe to Newsletter

 
 
SORIC® SF 2 mm | HP-CORE-SF-2
SORIC® SF 2 mm | HP-CORE-SF-2
SORIC® SF 2 mm | HP-CORE-SF-2
Preview: SORIC® SF 2 mm | HP-CORE-SF-2
Preview: SORIC® SF 2 mm | HP-CORE-SF-2
Preview: SORIC® SF 2 mm | HP-CORE-SF-2
SORIC® SF 2 mm | HP-CORE-SF-2
Mobile Preview: SORIC® SF 2 mm | HP-CORE-SF-2
Mobile Preview: SORIC® SF 2 mm | HP-CORE-SF-2
Mobile Preview: SORIC® SF 2 mm | HP-CORE-SF-2

SORIC® SF 2 mm | HP-CORE-SF-2

Product No.:
HP-CORE-SF-2
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-2,9 m²
per 15,80 EUR
3-4,9 m²
per 14,54 EUR
5-9,9 m²
per 13,28 EUR
10-24,9 m²
per 11,84 EUR
25-49,9 m²
per 10,65 EUR
50-101,5 m²
per 9,48 EUR
> 101,5 m²
per 8,57 EUR
15,80 EUR

incl. 19% tax excl. Shipping costs

Customers who bought this product bought also the following products:

Epoxy infusion resin HP-E120RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR
Mould Covering thixotropic  Epoxy Resin
  • High-quality mould covering resin
  • Non-drip, without run-off on vertical surfaces -high thixotropic, blue-grey coloured
  • Vacuum degassed
  • User friendly mixing ratios (100:10)
  • For abrasion-and breaking resistance surfaces with good thermal conductivity.
  • Innovative formulation, free of DETA1 with high styrene resistance.
from 29,90 EUR
Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LS
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Wax free, tacky for further bonds / layers
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
from 44,90 EUR
Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LSP
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Waxed for top or finish uses
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
from 47,50 EUR