Subscribe to Newsletter

 
 
Silicone rubber | HP-SI41GB
Silicone rubber | HP-SI41GB

Silicone rubber | HP-SI41GB

Product No.:
HP-SI41GB-1.03
ca. 1-3 days ca. 1-3 days  (abroad may vary)
24,90 EUR
24,17 EUR per Kg

incl. 19% tax excl. Shipping costs

Package:

This product is compatible with (for example):

High Performance Laminating System - Epoxy Resin | HP-E56L

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

5,50 EUR
39,29 EUR per Kg
Covering System - Gelcoat - Epoxy Resin | HP-E25DM
This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and medium viscosity.

Topcoat, 25 minutes working time
7,90 EUR
49,38 EUR per Kg
High Performance Laminating System - Epoxy Resin | HP-E111L
The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
26,50 EUR
18,93 EUR per Kg
Cleaning and degreasing agent - Acetone | HP-AC

Acetone is a solvent and is usually used to clean tools from resin, that has not yet dried completely. Furthermore it is often used for degreasing surfaces (e.g. fibre glass or carbon fibre).  

Cleaning and degreasing agent

9,90 EUR
9,90 EUR per Liter

This product is similar to:

Thinner for SI6GB / SI30GB / SI41GB | SI-RV
  • Excellent dilution effect
  • Solvent-free
  • Dilution of condensation and additioncuring RTV-2 silicone systems
  • Optimization of the gradient properties
  • Dosage till 10 %
  • Quantity: 500 g
19,94 EUR
39,88 EUR per Kg

Customers who bought this product bought also the following products:

T-Connector 10/10/10 mm | HP-VZ1070
  • Push-in T-connector for easy connection
  • All sides of the same diameter
  • For tubes with a outside-diameter of 10 mm
5,69 EUR
Connector with female thread  G1/4" - 10 mm | HP-VZ1100
  • Push-in connector for easy connection
  • Connector with female thread G1/4"
  • For tubes with a outside-diameter of 10 mm
4,09 EUR
Lock valve with push-in connector 10/10 mm | HP-VZ1140
  • Lock valve for control the airflow by evacuation
  • Both sides of the same diameter
  • For tubes with a outside-diameter of 10 mm
13,98 EUR
PE hose for vacuum moulding standard | HP-VZ1010
The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.
 
Available dimensions:
Material: PE
Outer-Ø: 10 mm
Inner-Ø: 8 mm
1,33 EUR