Subscribe to Newsletter

 
 
500 g/m² Unidirectional Carbonfabric
Carbon fabric Unidirectional 12K Toray
Carbon Fibre Unidirectional Fabric SP-U500/50C
Preview: 500 g/m² Unidirectional Carbonfabric
Preview: Carbon fabric Unidirectional 12K Toray
Preview: Carbon Fibre Unidirectional Fabric SP-U500/50C
500 g/m² unidirectional carbon fabric 12K Toray | SP-U500/50C
500 g/m² Unidirectional Carbonfabric
Carbon fabric Unidirectional 12K Toray
Carbon Fibre Unidirectional Fabric SP-U500/50C
Mobile Preview: 500 g/m² Unidirectional Carbonfabric
Mobile Preview: Carbon fabric Unidirectional 12K Toray
Mobile Preview: Carbon Fibre Unidirectional Fabric SP-U500/50C

500 g/m² unidirectional carbon fabric 12K Toray | SP-U500/50C

Product No.:
SP-U500/50C
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-2,5 m²
per 26,78 EUR
3-4,5 m²
per 25,36 EUR
5-9,5 m²
per 23,51 EUR
10-19,5 m²
per 21,18 EUR
20-39,5 m²
per 19,41 EUR
> 39,5 m²
per 17,71 EUR
26,78 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

500 g/m² unidirectional carbon fabric 12K Toray | SP-U500/50C

**Special Item from larger industrial production**
In this UD fabric, the fibres are fixed in the 0° direction by a hot melt thread in the 90° direction.
Uniform and well drapable carbon fabric. It is easy to cut without the fabric falling apart.

Construction: 0°
Weight: 500 g/m²
Width: 50 cm
0°: 12K Torayca T700 fibre
90°: Hot melt thread
 
 
Areas of application: 
Modelling, sport equipment making, ship and boat construction, motor sport, orthopaedic technic, ...
 
Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 600 g/m²
Laminate thickness: 0,80 mm
Laminate weight: 1100 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

** The running lengths of the rolls vary! Therefore, it is possible that one position consists of several rolls **
Working Notes & Support
Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)
 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

 

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:
 
Plain
  • The simplest weave
  • Very slip-resistant
  • Bad drapability
  • Suitable for flat plates or easy moulds

Twill
  • Diagonally running lines are characteristic
  • Better drapability than plain weave
  • Less slip-resistant
  • Suitable for complicated geometries

Satin
  • Suitable for complicated geometries
  • Very good drapability
  • Low slip-resistance
  • Less mesh crossing, therefore strength in the laminate
  • Leaves a very smooth surface

This product is compatible with (for example):

Sealant Tape | HP-ST12X3/80
Sealant Tape | HP-ST12X3/80
Material: Butyl Rubber
Width: 12 mm
Thickness: 3 mm
Length: 15 mtr.
10,41 EUR
High Performance Laminating Resin Epoxy HP-E56L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 5,50 EUR
39,29 EUR per Kg
High performance laminating system HP-E29L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

26,50 EUR
18,93 EUR per Kg
Scissors "OPTIMA" | HP-L1054
Scissors "OPTIMA" | HP-L1054
Lenght: 29 cm
Blade lenght: 12 cm
Colour: blue
7,45 EUR

Customers who bought this product bought also the following products:

infusionsystem resin and hardener HP-E200GL
Infusion System -Epoxy Resin | HP-E200GL
The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
5,90 EUR
45,38 EUR per Kg
High Performance Laminating System - Epoxy Resin | HP-E111L
High Performance Laminating System - Epoxy...
The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
26,50 EUR
18,93 EUR per Kg
High performance laminating system HP-E29L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

26,50 EUR
18,93 EUR per Kg
High heat resistant Epoxy Resin HP-E120WSI
High heat resistant System - Epoxy Resin...

The Epoxy System HP-E120WSI is an unfilled, low viscous, 2-component combination of resin and hardener. It can be used as a laminating and vacuum-infusion resin system for a high temperature stabilities.

Vacuum-infusion, heat stability up to 125°C

15,90 EUR
50,48 EUR per Kg