Main page » Core material - Sandwich material - approx. 3mm thick | HP-CORE-3

Core material - Sandwich material - approx. 3mm thick | HP-CORE-3

Core material - Sandwich material - approx. 3mm thick | HP-CORE-3

Product No.:: HP-CORE-3
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,9 m²: per 13,15 EUR
3-4,9 m²: per 11,13 EUR
5-9,9 m²: per 9,62 EUR
10-24,9 m²: per 8,85 EUR
25-49,9 m²: per 8,09 EUR
> 49,9 m²: per 7,08 EUR

13,15 EUR

incl. 19% tax excl. Shipping costs

Description

Core material - Sandwich material - approx. 3mm thick | HP-CORE-3

HP-CORE is a high performance non-woven fabric developed specifically for the Fibre Reinforced Plastics (FRP) industry.
Designed with a micro-cellular structure, which provides volume with a very low weight and voids that allow easy absorption of resin, HP-CORE is ideal for use as a core material in FRP sandwich constructions with polyester and epoxy resin.

Features:

Stretchable in all directions - in the wet as well as in the dry
Good drapability
Suitable for complicated shapes
Suitable for polyester, vinyl ester and epoxy resins

*Please enter below the desired quantity in m²

Areas of application:
Swimming pools, boat building (hulls, superstructures), canoes and kayaks, containers and mold making, vehicle parts (chassis, bodywork and roof boxes), motor homes and caravans, ski and snowboards, and much more.

Technical Data

Technical Data:

width	100 cm
Dry thickness (+/- 10%)	3,0 mm
Dry weight (+/-15%)	90 g/m²
Resin absorption	1,8 kg/m²
Specific weight	630 kg/m³

This product is compatible with (for example):

Epoxy resin for infusion process HP-E30RI

Infusion System - Epoxy Resin | HP-E30RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 30 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 61,90 EUR

170 g/m² Glass fabric tape Plain (Width:...

Construction:	Plain
Weight:	170 g/m²
Width:	2,5 cm
roll length:	100 m

0,37 EUR

High-Gloss Release Agent | HP-HGR5

Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
Fast drying time (per layer <5 minutes at 20°C)
Semipermanent, external release agent with good demoulding features
Minimises remains on the moulds’ surface – and at the same time no transmission to the component

from 9,88 EUR

Degassing additive | HP-BEL51

HP-BEL51 is a defoaming and degassing agent
Solution of functional polymers and polysiloxanes

Stir it preferably into the base resin before adding other components. It is also possible to add the additive to the finished systems.

from 3,45 EUR

20 cm plastic Stirrer | HP-L1120

Colour:	Red
Material:	Plastic
Size:	20 cm incl hole and retaining hooks

0,83 EUR

This product is similar to:

Scissors "OPTIMA" | HP-L1054

Lenght:	28 cm
Blade lenght:	12 cm
Colour:	blue

7,45 EUR

Customers who bought this product bought also the following products:

Cotton flocks | HP-BF1

Thickener, viscosity control
Reinforcement of splices, adhesive beads
In combination with glass fiber chips (HP-GS6) for coupling layers in mold making

from 3,50 EUR