Subscribe to Newsletter

 
 

Polyester Resin

For cost reasons, polyester resin systems make up a very large proportion within the plastics industry in terms of volume. Their applications range from small buttons to sanitary articles and pond/pool coatings to boat building. Polyester resins are cured by adding a MEKP hardener.
 

Polyester resin systems for various applications

Polyester resin topcoat with hardener | HP-P21TC
Polyester resin topcoat with hardener | HP-P21TC
  • High-quality, unsaturated polyester gelcoat based on ISO/NPG 
  • Thixotropic, non-adhesive curing airside (waxy)
  • Cobalt pre-accelerated
  • Slightly higher elasticity (semi-flexible and therefore less damage on the laminate)
  • High UV stability, excellent weather resistance
  • Good chemical and hydrolysis resistance for swimming pool and boat building
  • viscosity set for manual application
from 15,90 EUR
15,90 EUR per Kg
incl. 19% tax excl. Shipping costs
Polyester resin based on orthophtalic acid | HP-P21L
Polyester resin based on orthophtalic acid -Resin & Hardener | HP-P21L
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Wax free, tacky for further bonds / layers
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
quantity:
42,50 EUR
41,67 EUR per Kg
incl. 19% tax excl. Shipping costs
Can(s):
 
Polyester resin based on orthophtalic acid -Resin & Hardener- | HP-P21LPG
Polyester resin based on orthophtalic acid -Resin & Hardener- | HP-P21LPG

  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Wax free, tacky for further bonds / layers
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
quantity:
43,50 EUR
42,65 EUR per Kg
incl. 19% tax excl. Shipping costs
Can(s):
 
Polyester resin based on orthophtalic acid -Resin & Hardener- | HP-P21LP
Polyester resin based on orthophtalic acid -Resin & Hardener- | HP-P21LP

  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Wax free, tacky for further bonds / layers
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
quantity:
42,50 EUR
41,67 EUR per Kg
incl. 19% tax excl. Shipping costs
Can(s):
 
Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LS
Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LS
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Wax free, tacky for further bonds / layers
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
quantity:
44,90 EUR
44,02 EUR per Kg
incl. 19% tax excl. Shipping costs
Can(s):
 
Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LSP
Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LSP
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Waxed for top or finish uses
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
quantity:
47,50 EUR
46,57 EUR per Kg
incl. 19% tax excl. Shipping costs
Can(s):
 
Hardener for polyester resins | HP-MEKP
Hardener for Polyester Resins | HP-MEKP
  • Can be used for the pre-accelerated polyester resins of the series HP-P21,
  • Foreign resin may require preliminary!
  • Designed for laminating resins and gel / topcoats with co-Oktoat accelerator
  • Used medium reactive, at room temperature
quantity:
4,70 EUR
47,00 EUR per Kg
incl. 19% tax excl. Shipping costs
Piece:
 
1 to 7 (from a total of 7)