Subscribe to Newsletter

 
 
Hardener for polyester resins | HP-MEKP
Hardener for Polyester Resins | HP-MEKP

Hardener for Polyester Resins | HP-MEKP

Product No.:
HP-MEKP-100
ca. 1-3 days ca. 1-3 days  (abroad may vary)
4,70 EUR
47,00 EUR per g

incl. 19% tax excl. Shipping costs

Piece:

This product is compatible with (for example):

Infusion System - Epoxy Resin | HP-E15GL
The hardener HP-E15GL allows a pot-life of 15minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose. 

Vacuum Infusion, Pressure Injection
5,90 EUR
45,38 EUR per Kg
Infusion System - Epoxy Resin | HP-E120RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

58,90 EUR
16,83 EUR per
Infusion System -Epoxy Resin | HP-E200GL
The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
5,90 EUR
45,38 EUR per Kg

Customers who bought this product bought also the following products:

Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LS
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Wax free, tacky for further bonds / layers
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
16,50 EUR
16,18 EUR per Kg
Polyester resin based on orthophtalic acid -Resin & Hardener | HP-P21L
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Wax free, tacky for further bonds / layers
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
15,90 EUR
15,59 EUR per Kg
Film release agent | HP-PVA
  • High-quality, silicon-free Film Release Agent based on polyvinyl alcohol.
  • Allows repeated moulding on smooth and dense subsoils
  • Sprayable Release Agent for epoxy and polyester resins
  • Forms film-like materials
  • Drying-time approx. 5-10 min.

 
8,50 EUR
42,50 EUR per Liter