Spray adhesive 400 ml | HP-FIX400
Spray adhesive 400 ml | HP-FIX400
The spray adhesive HP-FIX400 is for the fixation of different reinforcement materials from HP-Textiles to hold single layers in position.
Properties and application notes:
Drying Time: 5 min (20°C)
Heat resistance: 80°C
Colour: Milky cloudy
Heat resistance: 80°C
Colour: Milky cloudy
Technical data:
| Content: | 400 ml |
| Shelf-life: | 18 month at optimal storage conditions |
| Optimal temperature: | 18 - 25°C |
- To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
- Application in combination with the epoxy resins from HP-Textiles
- Excellent spray control with adjustable spray button and dosage valve
- Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials
► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
Working Notes:
In this instruction you will find tips & tricks for the vacuum infusion process:
Vacuum infusion process (PDF)
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator
Hazard Statements:
Danger:
H222 Extremly flammable aerosol
H229 Container is under pressure: May burst if warmed up
H315 Causes skin irritation
H336 May cause drowsiness and dizziness
H411 Toxic to aquatic life with long lasting effects
Laminate Calculator
Hazard Statements:
Danger:
H222 Extremly flammable aerosol
H229 Container is under pressure: May burst if warmed up
H315 Causes skin irritation
H336 May cause drowsiness and dizziness
H411 Toxic to aquatic life with long lasting effects
.jpg "Preview: 105 g/m² Peel Ply Twill (Width: 25 cm) | HP-T105P25")
.jpg "Preview: 160 g/m² Carbon Fabric Twill | HP-T160C")
