Infusion System - Epoxy - Resin component | HP-HE3000RI
Vacuum Infusion, Pressure Injection | Epoxy Resin HP-HE3000RI
Base of the series HP-E3000RI is an unfilled epoxy-resin, which is mixable with different harderners for severals applications.The hardeners HP-E30RI and HP-E300RI allow a pot-life times between 30 and 300 minutes.
Here you will find the suitable hardener
Furthermore the hardener HP-E120RI provides higher temperature stabilities.
Features & Benefits:
- Very low viscosities and excellent fibre wet-out and flow properties
- Pot-life time adjustable between 30 (hardener HP-HTE30RI) and 300 minutes (hardener HP-HTE300RI)
- Fast hardener HP-HTE3RI for very short curing cycles available
- Glas transition temperature 98 °C (with hardener HP-E120RI)
- High dynamic and static strength
- Vacuum-infusion methods (IMC/MTI, RI, VARI, SCRIMP®,…)
- Pressure injection methods (RTM, RIM,…)
- Filament winding
- Hand laminating
- Optical application such as visible carbon parts (hardener HP-E120RI)
Product Properties Epoxy Resin HP-HE3000R
- Colouring: colourless, transparent
- Mixing ratios: 100 parts resin / 30 parts hardener (by weight)
- Working Time (pot life): 3 - 300 min (at 20°C or 68°F)
- Working Temperature: 20 °C
- Compatible Hardeners: HP-HTE3RI, HP-HTE30RI, HP-HTE120RI und HP-HTE300RI
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Vacuum infusion; the IMC/MTI® - Process (PDF)
Vacuum infusion; the IMC/MTI® - Process (Video)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Caution
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.
.jpg "Preview: 650 g/m² Glass fabric Unidirectional | HP-U600E")
.jpg "Preview: 650 g/m² Glass fabric Unidirectional | HP-U600E")
