300 g/m² Unidirektional Carbonfabric | HP-U300/122C
NEW
300 g/m² Unidirectional Carbonfabric | HP-U300/122C
Construction: 0°
Weight: 300 g/m²
Width: 122 cm
Weight: 300 g/m²
Width: 122 cm
Fibre orientation:
| 0°: | 315 g/m² (HT-Fibre 50K) |
| 90°: | 9,8 g/m² E-Glass |
| Stitching: | 6,8 g/m² PES |
| Stitch type: | Tricot |
Total area weight incl. fixation: approx. 332 g/m²
Advantages of Carbonfabric HP-U300/122C:
- Thickness and weight over the whole fabric´s width is constant
- The surface of filaments are smooth, therefore the fabric is very handy to process
- All filaments are strictly parallel, not twisted to the right or left
- All filaments are sufficiently strained, therefore the final product have a good physical-mechanical
Areas of application:
Wind energy, sports equipment making, ship and boat construction, motor sport, modelling ...
Calculated data for hand laminate with 35% volume percent fibres:
Resin consumption: 360 g/m²
Laminate thickness: 0,48 mm
Laminate weight: 660 g/m²
► Laminate calculator
Here you can calculate specific values for your application.
Delivery notes for this product:
The length of the rolls may vary. Therefore it is possible that a position of 10m² or more consists of several rolls.
Resin consumption: 360 g/m²
Laminate thickness: 0,48 mm
Laminate weight: 660 g/m²
► Laminate calculator
Here you can calculate specific values for your application.
Delivery notes for this product:The length of the rolls may vary. Therefore it is possible that a position of 10m² or more consists of several rolls.
Working Notes:
In this instruction you will find tips & tricks for epoxy resins and fabrics in boatbuilding:
Boatbuilding (PDF)
further working notes you will find here
Decision guidance for Epoxy Resins:
Overview Epoxy Resins (PDF)
Working Notes:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator
Characteristics of unidirectional Carbonfabrics (0°):
Unidirectional
|
|
