Infusion System - Epoxy Resin | HP-E300GL
Vacuum Infusion, Pressure Injection | Epoxy Resin HP-E300GL
The HP-E300GL series is based on an unfilled epoxy resin, which can be individually adjusted with different hardeners for the respective application and thus enables a long pot life of approx. 300 minutes.A special feature of this series is a high initial glass transition temperature (Tg) by hardening at room temperature.
The use of the hardener HP-E200GL increases the maximum glass transition temperature (Tg MAX) up to 107°C.
The series also has a high transparency so that it is very suitable for visible carbon parts.
Features & Benefits:
- extremely low viscosity, so it has a very good fibre wet-out
- pot life time can be freely adjusted between 15 minutes (hardener HP-E15GL) and 300 minutes (hardener HP-E300GL)
- glass transition temperature (Tg max) up to 107 °C (hardener HP-E200GL)
- high static and dynamic strength
- pressure injection methods (RTM, RIM,…)
- vacuum-infusion methods (IMC/MTI, RI, VARI, SCRIMP®,…)
- filament winding
- hand laminating
- optical application such as visible carbon parts (hardener HP-E200GL)
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping.
A technically comparable alternative is our HP-E300RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping.
A technically comparable alternative is our HP-E300RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Product Properties Epoxy Resin HP-E300GL
- Colouring: trasnparent
- Mixing ratios: 100 parts resin / 30 parts hardener (by weight)
- Working Time (pot life): 300min (at 20°C or 68°F)
- Working Temperature: 20 - 30°C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin: Safety data sheet (PDF)
Caution
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H318 Causes serious eye damage
H360F May damage fertility
H411 Toxic to aquatic life with long lasting effects
Hardener: Safety data sheet (PDF)
Caution
H314 Causes severe skin burns and eye damage
H317 May cause an allergic skin reaction
H412 Harmful to aquatic life with long lasting effects
Shipping Terms
National (Germany):
- No shipping to private customers.
- Sale exclusively to business customers, if:
- the product is used for one of the purposes listed below and
- this is confirmed during the ordering process via checkbox.
International:
- Shipping available to all customers (private or commercial) without additional confirmation.
Chemicals Ban Ordinance (ChemVerbotsV) Declaration
According to the Chemicals Ban Ordinance (ChemVerbotsV), we can only sell this product to individuals over the age of 18, if one of the following uses applies:
- Professional Use:
Use within the framework of a registered, ongoing commercial activity that involves processing such substances. - Public Institutions:
Research, analysis, education, or teaching at public research or educational institutions. - Resale:
Compliance with §6 of the ChemVerbotsV is hereby confirmed.
➔ A copy of the proof of expertise according to §11 ChemVerbotsV must be submitted via email after the order.
Mandatory Confirmation During the Ordering Process
By selecting the checkbox(es) during the ordering process, you confirm:
- You are authorized to purchase the product in accordance with the current ChemVerbotsV.
- You will use the product exclusively:
- in accordance with the corresponding product and safety data sheets,
- and for one of the above-mentioned purposes.
- You will comply with all applicable regulations when handling and processing the product.
Notes & Legal Declaration
- I/we confirm compliance with all applicable chemical regulations (especially the ChemVerbotsV).
- The required product and safety information (e.g. in the "Hazard Statements" tab) are available and have been acknowledged.
- False statements may have legal consequences.
- This confirmation may be submitted to the responsible authority upon request.
- Any changes to my/our purchasing status will be communicated to HP-Textiles GmbH without delay.
- This declaration is valid until revoked.
.png "Preview: Clear coat matte 400 ml | HP-KL500M")