Infusion System - Epoxy - Hardener component | HP-HTE300GL
Vacuum Infusion, Pressure Injection | Epoxy - Hardener HP-HTE300GL
The hardener HP-HTE300GL allows a pot-life of 300 minutes.The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose. A special feature of this series is a high initial glass transition temperature (Tg) by hardening at room temperature.The use of the hardener HP-E200GL increases the maximum glass transition temperature (Tg MAX) up to 107°C.
The series also has a high transparency so that it is very suitable for visible carbon parts.
Here you will find the suitable resin
Features & Benefits:
- Extremely low viscosity, so it has a very good fibre wet-out
- Pot life time can be freely adjusted between 15 minutes (hardener HP-E15GL) and 300 minutes (hardener HP-E300GL)
- Glass transition temperature (Tg max) up to 107 °C (hardener HP-E200GL)
- High static and dynamic strength
- Vacuum-infusion methods (IMC/MTI, RI, VARI, SCRIMP®,…)
- Pressure injection methods (RTM, RIM,…)
- Filament winding
- Hand laminating
- Optical application such as visible carbon parts (hardener HP-E200GL)
Product Properties Epoxy Resin HP-HTE300GL
- Colouring: transparent
- Mixing ratios: 100 parts resin / 30 parts hardener (by weight)
- Working Time (pot life): 300 min (at 20°C or 68°F)
- Working Temperature: 20 - 30°C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Hardener:
Caution
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
