Infusion System - Epoxy - Hardener component | HP-HTE15GL
Vacuum Infusion, Pressure Injection | Epoxy - Hardener HP-HTE15GL
The hardener HP-HTE15GL allows a pot-life of 15minutes.The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose. A special feature of this series is a high initial glass transition temperature (Tg) by hardening at room temperature.The use of the hardener HP-E200GL increases the maximum glass transition temperature (Tg MAX) up to 107°C.
The series also has a high transparency so that it is very suitable for visible carbon parts.
Here you will find the suitable resin
Features & Benefits:
- Extremely low viscosity, so it has a very good fibre wet-out
- Pot life time can be freely adjusted between 15 minutes (hardener HP-E15GL) and 300 minutes (hardener HP-E300GL)
- Glass transition temperature (Tg max) up to 107 °C (hardener HP-E200GL)
- High static and dynamic strength
- Vacuum-infusion methods (IMC/MTI, RI, VARI, SCRIMP®,…)
- Pressure injection methods (RTM, RIM,…)
- Filament winding
- Hand laminating
- Optical application such as visible carbon parts (hardener HP-E200GL)
Product Properties Epoxy Resin HP-HTE15GL
- Colouring: slightly yellow
- Mixing ratios: 100 parts resin / 30 parts hardener (by weight)
- Working Time (pot life): 15min (at 20°C or 68°F)
- Working Temperature: 20 °C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Hardener: Safety data sheet (PDF)
Caution
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H361d Suspected of damaging the unborn child.
H372 Causes damage to organs through prolonged or repeated exposure.
H412 Harmful to aquatic life with long lasting effects.
Shipping Terms
National (Germany):
- No shipping to private customers.
- Sale exclusively to business customers, if:
- the product is used for one of the purposes listed below and
- this is confirmed during the ordering process via checkbox.
International:
- Shipping available to all customers (private or commercial) without additional confirmation.
Chemicals Ban Ordinance (ChemVerbotsV) Declaration
According to the Chemicals Ban Ordinance (ChemVerbotsV), we can only sell this product to individuals over the age of 18, if one of the following uses applies:
- Professional Use:
Use within the framework of a registered, ongoing commercial activity that involves processing such substances. - Public Institutions:
Research, analysis, education, or teaching at public research or educational institutions. - Resale:
Compliance with §6 of the ChemVerbotsV is hereby confirmed.
➔ A copy of the proof of expertise according to §11 ChemVerbotsV must be submitted via email after the order.
Mandatory Confirmation During the Ordering Process
By selecting the checkbox(es) during the ordering process, you confirm:
- You are authorized to purchase the product in accordance with the current ChemVerbotsV.
- You will use the product exclusively:
- in accordance with the corresponding product and safety data sheets,
- and for one of the above-mentioned purposes.
- You will comply with all applicable regulations when handling and processing the product.
Notes & Legal Declaration
- I/we confirm compliance with all applicable chemical regulations (especially the ChemVerbotsV).
- The required product and safety information (e.g. in the "Hazard Statements" tab) are available and have been acknowledged.
- False statements may have legal consequences.
- This confirmation may be submitted to the responsible authority upon request.
- Any changes to my/our purchasing status will be communicated to HP-Textiles GmbH without delay.
- This declaration is valid until revoked.
