Epoxy resin

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, High UV-stability, 25 minutes working time

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

• High-quality mould covering resin
• Non-drip, without run-off on vertical surfaces -high thixotropic, deep black coloured
• Vacuum degassed
• User friendly mixing ratios (100:10)
• For abrasion-and breaking resistance surfaces with good thermal conductivity.
• Innovative formulation, free of DETA1 with high styrene resistance.

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The series is usable for
hand-laminating, too.

Vacuum Infusion, Pressure Injection

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The series is usable for
hand-laminating, too.

Vacuum Infusion, Pressure Injection

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities, what supports excellent wet-out and flow properties. The series is usable for hand-laminating, too.

Vacuum Infusion, Pressure Injection

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties.
The series is usable for hand-laminating, too.

Vacuum Infusion, Pressure Injection

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The series is usable for
hand-laminating, too.

Vacuum Infusion, Pressure Injection

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The series is usable for
hand-laminating, too.

Vacuum Infusion, Pressure Injection

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

The Epoxy-System HP-E28L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 28 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

• PUR primer for sticking or laminating on smooth surfaces
• High adhesion, suitable for all epoxy resins from HP-Textiles
• Black ground coat (primer for carbon design)
• For spraying, manual application with paint-brush or roller is also possible
• Wax free, without styrene