Covering System - Gelcoat - Epoxy Resin | HP-E25DM
Topcoat, Covering, Gelcoat, Epoxy Resin | HP-E25DM
This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and medium viscosity.
Features & Benefits
- High resistance to UV radiation, very slight yellowing
- Good wet-out of reinforcement fibres
- Cause bright, non-gluey (tack-free) surfaces and casts; suitable for carbon-look laminates (observe Tg MAX)
- Cold-hardening, applicable from 10°C
- Epoxy-gelcoat, for transparent coatings, medium-viscosity
Product Properties Epoxy System E25DM
- Colouring: colourless / clear
- Mixing Ratio (by weight): 100 parts resin : 60 parts hardener
- Mixed Viscosity: medium viscous
- Working Time (pot life): 25 minutes (100g at 20°C)
- Working temperature (optimum): 15 - 25 °C
- Working temperature (minimum): 10 °C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Practical Tips Carbon Coating (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
H302+H312+H332 Harmful if swallowed, in contact with skin or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
.jpg "Preview: 105 g/m² Peel Ply Twill (Width: 25 cm) | HP-T105P25")
