Main page » Reinforcement Fabrics » Glass Filament Fabric Silane » Twill » 166 g/m² Glass Fabric "Silane" Twill | HP-T163E

166 g/m² Glass Fabric "Silane" Twill | HP-T163E

Name: 166 g/m² Glass Fabric "Silane" Twill | HP-T163E
SKU: HP-T163E
Price: 5.25 EUR
Availability: InStock

Product No.:: HP-T163E
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-4,9 m²: per 5,25 EUR
5-9,9 m²: per 4,90 EUR
10-24,9 m²: per 4,55 EUR
25-49,9 m²: per 3,85 EUR
50-99,9 m²: per 2,98 EUR
> 99,9 m²: per 2,54 EUR

5,25 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

Glass Fiber Fabric Silane Twill | HP-T163E

Weight: 166 g/m²
Weave: Twill 2/2
Sizing: Silane
Width: 100 cm

Yarn type specifications:
Warp: 12 y/cm (EC9-68 tex)

Weft: 11,5 y/cm (EC9-68 tex)

Areas of application:

Design of models-, sport equipment, boat-, tank-, and mould making, car-parts, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 136 g/m²
Laminate thickness: 0,18 mm
Laminate weight: 302 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

160 g/m² Glass fabric Bidiagonal | HP-B160E...

Construction:	+/-45°
Weight:	160 g/m²
Width:	127 cm

4,71 EUR

15 mm Laminating brush | HP-L1107

Width:	15 mm
Bristle:	Black China bristle
Stalk:	Wood stalk

0,85 EUR

Infusion System - Epoxy - Hardener component...

The hardener HP-HTE120RI allows a pot-life of 200 minutes.
Base of the series HP-E3000RI is an unfilled epoxy-resin, which is mixable with different hardeners for severals applications. The series is usable for hand-laminating, too.

Vacuum Infusion, Pressure Injection

from 18,90 EUR

Infusion System - Epoxy Resin | HP-E15GL

The hardener HP-E15GL allows a pot-life of 15minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E30RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

on request

Customers who bought this product bought also the following products:

Chopped Glass Fibres 6 mm | HP-GS6

For an increased tensile, compressive and flexural strength
Mixture remains flowable
For moulding material
Reinforcement of gluing spots / adhesive beading
In combination with cotton flocks (HP-BF1) suitable for coupling layers in mould making

from 2,59 EUR

Cleaning and degreasing agent - Acetone...

Acetone is a solvent and is usually used to clean tools from resin, that has not yet dried completely. Furthermore it is often used for degreasing surfaces (e.g. fibre glass or carbon fibre).

Cleaning and degreasing agent

from 9,90 EUR

Radius roller | HP-RR

Aluminium radius roller are used for compressing and ventin the laminates with screw fastening incl. holder and plastic grip.

Suitable for glass fabrics