Subscribe to Newsletter

 
 
Glow in the dark light powder | HP-GLOW
Glow in the dark light powder | HP-GLOW
Glow in the dark light powder | HP-GLOW
Glow in the dark light powder | HP-GLOW
Glow in the dark light powder | HP-GLOW
Preview: Glow in the dark light powder | HP-GLOW
Preview: Glow in the dark light powder | HP-GLOW
Preview: Glow in the dark light powder | HP-GLOW
Preview: Glow in the dark light powder | HP-GLOW
Preview: Glow in the dark light powder | HP-GLOW
Glow in the dark light powder | HP-GLOW
Mobile Preview: Glow in the dark light powder | HP-GLOW
Mobile Preview: Glow in the dark light powder | HP-GLOW
Mobile Preview: Glow in the dark light powder | HP-GLOW
Mobile Preview: Glow in the dark light powder | HP-GLOW
Mobile Preview: Glow in the dark light powder | HP-GLOW

Glow in the dark light powder | HP-GLOW

Product No.:
HP-GLOW
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
from 9,98 EUR

incl. 19% tax excl. Shipping costs

This product is compatible with (for example):

Casting system resin transparent HP-E50GB
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR
Epoxy Covering System

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

from 5,50 EUR
Stirring Rods | 1405
3 pieces of stirring rods made of wood for stirring of resin mixtures
  • Length 20 cm
  • Material wood
1,20 EUR
0,40 EUR per Spatula
Liquid thickening agent | HP-BEL31
  • BEL31 is added as thixotroping agent in mixed systems
  • Solution of functional carbonyl diamides
After short interaction time, it takes to build a multidimensional network structure, which increases the anti-sagging properties without impairing levelling.
from 5,39 EUR
Stirrer 20cm plastic
Colour: Red
Material: Plastic
Size: 20 cm incl hole and retaining hooks
0,83 EUR

This product is similar to:

Reactive diluent for epoxy resin
  • Consider RV23 in the calculation of the hardener quantity!
  • Dosage up to 20 %
  • For a lower brittleness, we recommend adding 5 %
  • Overdose leads to losses of heat resistance and tensile strength

The reactive thinner RV23 is a low viscous, difunctional additive for epoxy resin systems.

from 23,90 EUR
10 cm Velour Roller | HP-L1015
Width: 10 cm
Pile hight: 4 mm
1,25 EUR
170 g/m² Aramidfabric-Tape Plain (Widht: 5 cm) | HP-P171A/050
Weight: 170 g/m²
Weave: Plain
Width: 5 cm
3,90 EUR

Customers who bought this product bought also the following products:

Mould Release Agent for Epoxy and Polyester
  • Silicon free dispersion of wax in a dissolver mixture
  • Operating temperature up to 80°C
  • Sprayable, contains dissolver for epoxy and polyester resin
  • Suitable for smooth and dense undergrounds and in connection with the Film Release Agent HP-PVA
from 8,90 EUR
Mould Covering thixotropic  Epoxy Resin
  • High-quality mould covering resin
  • Non-drip, without run-off on vertical surfaces -high thixotropic, blue-grey coloured
  • Vacuum degassed
  • User friendly mixing ratios (100:10)
  • For abrasion-and breaking resistance surfaces with good thermal conductivity.
  • Innovative formulation, free of DETA1 with high styrene resistance.
from 29,90 EUR
Laminating Resin Epoxy HP-E28L

The Epoxy-System HP-E110L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 110 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR
T-hose connector straight 8/8/8mm HP-VZ1320
- Push t-connector for easy connection
- both sides of the same diameter
- for tubes with a inside-diameter of 8mm
Compatible with vacuum hose:
HP-VZ1010   HP-VZ1040
"Image similar"
1,24 EUR