Main page
»
Vacuum Technology
»
Vacuum Bagging Film
»
Vacuum Bagging Tube
»
70 g/m² Vacuum Bagging Film Tube | HP-VFT70/150


70 g/m² Vacuum Bagging Film Tube | HP-VFT70/150
70 g/m² Vacuum Bagging Film Tube | HP-VFT70/150
- Product No.:
- HP-VFT70/150
- Shipping time:
-
ca. 1-3 days (abroad may vary)
- Stock:
- m²
- Minimum order:
- 5
Sliding scale prices
- 5-9,9 m²
- per 2,92 EUR
- 10-24,9 m²
- per 2,24 EUR
- 25-49,9 m²
- per 1,77 EUR
- 50-99,9 m²
- per 1,42 EUR
- 100-299,9 m²
- per 1,26 EUR
- 300-599,9 m²
- per 1,06 EUR
- > 599,9 m²
- per 0,94 EUR
70 g/m² Vacuum Bagging Film Tube | HP-VFT70/150
Our Vacuum bagging film tube is a flexible green transparent film to be used in the vacuum assisted resin transfer moulding for manufacturing all types of composites mould. It is used due to its excellent physical properties such as high elongation, good flexibility, toughness and very less permeability.
Material: PE / PA / PE
Weight: 70 g/m²
Width: 150 cm
Extent: 300 cm
Diameter: 95,49 cm
Weight: 70 g/m²
Width: 150 cm
Extent: 300 cm
Diameter: 95,49 cm
Technical data:
Melting point: | 127 °C |
Thickness: | 70 µm |
Colour: | transparent |
Elongation at break: | >300% |

1 m = 3 m²
Working Notes:
In this instruction you will find tips & tricks for the vacuum infusion process:
Vacuum infusion process (PDF)
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator
Laminate Calculator
Product Safety (GPSR):
Here you will find information for the safe use of vacuum bagging film tube:
Product information for safe handling (PDF)
Here you will find information for the safe use of vacuum bagging film tube:
Product information for safe handling (PDF)
This product is compatible with (for example):

The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.
Vacuum Infusion, Pressure Injection
Vacuum Infusion, Pressure Injection
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Shippingtime:
ca. 1-3 days
from 5,90 EUR
Shippingtime:
ca. 1-3 days
This product is similar to:

- Regulates itself the infusion of resin
- No resin pooling at inlet point
- Fibres are evenly covered with resin
- Homogeneous laminate
- Optimum fibre volume ratio
- Highest quality of parts with reproducible results
- Working hours and its costs can be saved
Shippingtime:
ca. 1-3 days
4,64 EUR
Shippingtime:
ca. 1-3 days