Main page
»
Epoxy Resin
»
Laminate Systems
»
High heat resistant systems
»
High heat resistant System - Epoxy Resin | HP-E120WSM

High heat resistant System - Epoxy Resin | HP-E120WSM
High heat resistant System - Epoxy Resin | HP-E120WSM
- Product No.:
- HP-E120WSM
- Shipping time:
-
ca. 1-3 days (abroad may vary)
- Stock:
- Package
Mould and tool making, heat stability up to 150°C | Epoxy Resin HP-E120WSM
The Epoxy System HP-E120WSM is an unfilled, medium viscous, 2-component combination of resin and hardener. It can be used as a laminating resin system for a high temperature stabilities.
Features & Benefits
- Very good wetting of the reinforcement fiber
- High static and dynamic strength
- Very good dimensional stability under heat up to 150°C
- Tempering required before demolding!
- Good resistance to fuels
- Hot curing, post cure is necessary
- Colourless, clear
- Special laminating- and multipurpose resin
- Building of high heat resistant components
- Usable for mould and tool making
- Production of composites made of glass-, carbon- or aramid fabrics
- Optical application such as visible carbon parts
Product Properties Epoxy Resin HP-E120WSM
- Mixing ratio (weight): 100 parts resin / 26 parts hardener
- Mixing viskosity: medium viscous
- Color: colourless, clear
- Pot life time 20°C (Processing time approx.): 120 minutes (100 g)
- Pot life time 25°C (Processing time approx.): 80 minutes (100 g)
- Post cure: 24 h / 20°C // 5 h / 60°C // 6 h / 80°C // 2 h / 120°C --> rise of temperatur 20°C /h

Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.


Hardener:
Danger
Harmful if swallowed or in contact with skin.
Causes severe skin burns and eye damage.
May cause an allergic skin reaction.
Harmful to aquatic life with long lasting effects.


This product is compatible with (for example):
This product is similar to:

The Epoxy System HP-E120WSI is an unfilled, low viscous, 2-component combination of resin and hardener. It can be used as a laminating and vacuum-infusion resin system for a high temperature stabilities.
Vacuum-infusion, heat stability up to 125°C
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping.
A technically comparable alternative is our HP-E120WSM + BM-RV23, this combination can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping.
A technically comparable alternative is our HP-E120WSM + BM-RV23, this combination can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Shippingtime:
ca. 1-3 days
from 15,90 EUR
Shippingtime:
ca. 1-3 days
Customers who bought this product bought also the following products:

** Special items from larger industrial production, good quality - no 2nd choice **
Yarn: Hexcel AS4D 3K
** The running lengths of the rolls vary! It is therefore possible that an item from 10m² consists of several rolls **
weight: 245g/m²
weave: twill 2/2
width: 125cm
*Please enter below the desired quantity in m²
Yarn: Hexcel AS4D 3K
** The running lengths of the rolls vary! It is therefore possible that an item from 10m² consists of several rolls **
weight: 245g/m²
weave: twill 2/2
width: 125cm
*Please enter below the desired quantity in m²
instead 33,70 EUR
only 23,59 EUR
You save 30%
only 23,59 EUR
You save 30%

*** New in our assortment!!! / 20% introductory discount!!! ***
- Colorless MATTE
- Adheres to almost all solid surfaces
- Protects against corrosion and UV light
- Ideal for epoxy resin surfaces and castings
- Smooth, colorless, scratch-resistant surface
instead 9,39 EUR
only 7,51 EUR
You save 20%
18,78 EUR per Liter
only 7,51 EUR
You save 20%
18,78 EUR per Liter