High heat resistant System - Epoxy Resin | HP-E120WSI
Vacuum-infusion, heat stability up to 125°C | Epoxy Resin HP-E120WSI
The Epoxy System HP-E120WSI is an unfilled, low viscous, 2-component combination of resin and hardener. It can be used as a laminating and vacuum-infusion resin system for a high temperature stabilities.
Features & Benefits
- Very low viscosity, excellent fibre wet-out and flow properties
- High static and dynamic strength
- Very good dimensional stability under heat up to 125°C
- Tempering required before demolding!
- Hot curing, post cure is necessary
- Colourless, clear
- Usable as a laminating and vacuum-infusion resin (IMC/MTI, RI, VARI,…)
- Building of high heat resistant components
- Production of composites made of glass-, carbon- or aramid fabrics
- Optical application such as visible carbon parts
Product Properties Epoxy Resin HP-E120WSI
- Mixing ratio (weight): 100 parts resin / 26 parts hardener
- Mixing viskosity: very low viskosity
- Color: colourless, clear
- Pot life time 20°C (Processing time approx.): 120 minutes (100 g)
- Pot life time 25°C (Processing time approx.): 80 minutes (100 g)
- Post cure: 24 h / 20°C // 5 h / 60°C // 6 h / 80°C // 2 h / 120°C --> rise of temperatur 20°C /h
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Danger
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
Harmful if swallowed or in contact with skin.
Causes severe skin burns and eye damage.
May cause an allergic skin reaction.
Harmful to aquatic life with long lasting effects.
.jpg "Preview: 105 g/m² Peel Ply Twill (Width: 25 cm) | HP-T105P25")
