Subscribe to Newsletter

 
 
100 g/m² Unidirectional Carbonfabric | HP-U100/50C
100 g/m² Unidirectional Carbonfabric | HP-U0100/50C
Preview: 100 g/m² Unidirectional Carbonfabric | HP-U100/50C
Preview: 100 g/m² Unidirectional Carbonfabric | HP-U0100/50C
100 g/m² Unidirectional Carbonfabric | HP-U100/50C
Mobile Preview: 100 g/m² Unidirectional Carbonfabric | HP-U100/50C
Mobile Preview: 100 g/m² Unidirectional Carbonfabric | HP-U0100/50C

100 g/m² Unidirectional Carbonfabric | HP-U100/50C

Product No.:
HP-U100/50C
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-2,5 m²
per 13,98 EUR
3-4,5 m²
per 13,42 EUR
5-9,5 m²
per 12,97 EUR
10-24,5 m²
per 11,89 EUR
25-49,5 m²
per 11,19 EUR
50-99,5 m²
per 10,50 EUR
> 99,5 m²
per 9,50 EUR
13,98 EUR

incl. 19% tax excl. Shipping costs

This product is compatible with (for example):

High Performance Laminating Resin Epoxy HP-E56L

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 5,50 EUR
Epoxy infusion resin HP-E300GL
The hardener HP-E300GL allows a pot-life of 300 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
from 56,50 EUR

This product is similar to:

Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LSP
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Waxed for top or finish uses
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
from 47,50 EUR
Standard laminating Resin Epoxy HP-E55L
TOP

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 5,50 EUR
Heat stability Epoxy Resin HP-E120WSM

The Epoxy System HP-E120WSM is an unfilled, medium viscous, 2-component combination of resin and hardener. It can be used as a laminating resin system for a high temperature stabilities.

Mould and tool making, heat stability up to 150°C

from 15,90 EUR
Thinner for PU-Coating
  • Neutral coloured
  • High dissolving power
  • Spray-thinner for In-Mould-Coating or other varnish based on PU
  • Mould cleaner

 
from 11,90 EUR

Customers who bought this product bought also the following products:

125 g/m² Unidirectional-Carbonfabric-Tape (Width: 25 mm) | HP-U125C/025
Construction:
Fibre: HT-Fibre
Weight: 125 g/m²
Width: 25 mm
2,50 EUR