Subscribe to Newsletter

 
 
Triplex Mesh for Vacuum Processes | HP-TX275/152
Triplex Mesh combines three vacuum assist materials in one: peel ply, perforated film and mesh
Vacuum process with the Triplex Mesh HP-TX275/152
Preview: Triplex Mesh for Vacuum Processes | HP-TX275/152
Preview: Triplex Mesh combines three vacuum assist materials in one: peel ply, perforated film and mesh
Preview: Vacuum process with the Triplex Mesh HP-TX275/152
Triplex Mesh for Vacuum Processes | HP-TX275/152
Mobile Preview: Triplex Mesh for Vacuum Processes | HP-TX275/152
Mobile Preview: Triplex Mesh combines three vacuum assist materials in one: peel ply, perforated film and mesh
Mobile Preview: Vacuum process with the Triplex Mesh HP-TX275/152

Triplex Mesh for Vacuum Processes | HP-TX275/152

Product No.:
HP-TX275/152
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
Minimum order:
5
Sliding scale prices
5-9,9 m²
per 7,74 EUR
10-24,9 m²
per 7,16 EUR
25-75,9 m²
per 6,31 EUR
76-151,9 m²
per 5,52 EUR
> 151,9 m²
per 5,09 EUR
7,74 EUR

incl. 19% tax excl. Shipping costs

This product is compatible with (for example):

infusionsystem resin and hardener HP-E200GL
The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 5,90 EUR
PE hose for vacuum moulding standard | HP-VZ1010
The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.
 
Available dimensions:
Material: PE
Outer-Ø: 10 mm
Inner-Ø: 8 mm
1,33 EUR
High performance laminating system HP-E29L

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 26,50 EUR

This product is similar to:

Y-Connector 10/10/10 mm | HP-VZ1120
  • Push-in Y-connector for easy connection
  • All sides of the same diameter
  • For tubes with a outside-diameter of 10 mm
5,38 EUR

Customers who bought this product bought also the following products:

Acrylic Cast Resin | HP-A15GB
  • Low heat generation
  • Easy to use and odourless
  • Possible addition of water up to 5%
  • Mixable with dry colour pigments
  • Addition of cotton flakes to increase the viscosity
  • Working time (pot life): 10-20 minutes (100g at 20°C)
from 20,50 EUR
PUR (Resin) Fast-Cast Polyurethane Resin System | HP-R4GB
  • Excellent flow characteristics
  • Fast curing, short demoulding time
  • Cold-hardening, demouldable at room-temperature
  • Working time (pot life): 3-4 minutes (100g at 20°C, layer thickness 30 mm)
from 15,49 EUR
Silicone rubber | HP-SI30GB
  • Medium viscous mould making
  • High tear strength
  • Working time 30 minutes
  • Smooth cast without air bubble
from 20,90 EUR
High performance laminating system HP-E29L

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 26,50 EUR