Spiral Tube for vacuum moulding | HP-ST080
Spiral Tube for vacuum moulding | HP-ST080

Spiral Tube for vacuum moulding | HP-ST080

Product No.:
HP-ST080-05
ca. 1-3 days ca. 1-3 days  (abroad may vary)
7,95 EUR
1,59 EUR per m

incl. 19% tax excl. Shipping costs

Roll(s):

This product is compatible with (for example):

Infusion System -Epoxy Resin | HP-E200GL
The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
5,90 EUR
45,38 EUR per Kg
High Performance Laminating System - Epoxy Resin | HP-E56L

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

5,50 EUR
39,29 EUR per Kg
Cleaning and degreasing agent - Acetone | HP-AC

Acetone is a solvent and is usually used to clean tools from resin, that has not yet dried completely. Furthermore it is often used for degreasing surfaces (e.g. fibre glass or carbon fibre).  

Cleaning and degreasing agent

9,90 EUR
9,90 EUR per Liter

This product is similar to:

Spiral hose connector 12 x 14,6 mm | HP-VZ1540
Spiral hose connector for easy connection of the vacuum infusion pipe.
Suitable for 12 mm pipe and spiral hoses up to 14,6 mm outside diameter.
4,38 EUR

Customers who bought this product bought also the following products:

Infusion System - Epoxy Resin | HP-E300RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 300 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

56,50 EUR
16,14 EUR per Kg
High-Gloss Release Agent | HP-HGR5
  • Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
  • Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
  • Fast drying time (per layer <5 minutes at 20°C)
  • Semipermanent, external release agent with good demoulding features
  • Minimises remains on the moulds’ surface – and at the same time no transmission to the component
7,50 EUR
75,00 EUR per Liter