Subscribe to Newsletter

 
 
Standard laminating Resin Epoxy HP-E55L
Laminating System - Epoxy Resin | HP-E55L
Standard laminating Resin Epoxy HP-E55L
TOP

Laminating System - Epoxy Resin | HP-E55L

Product No.:
HP-E55L
ca. 1-3 days ca. 1-3 days (abroad may vary)
from 5,50 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Standard Laminating Resin, Low Viscous | Epoxy Resin HP-E55L

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.


Features & Benefits

  • Very good wetting properties of the reinforcing fibres
  • Cold setting, de-mouldable at room temperature
  • Free of solvents and fillers
  • Improved physiological compatibility (no R62 labelling)
  • Practically shrink-free curing
  • Temperature resistance (Tg Max) up to 81°C
  • Free of Nonylphenol and DETA.

As impregnating and laminating resins in the areas of
  • Mould-making and fixture construction, industrial parts
  • Construction of sports equipment, model making
  • Orthopaedic
  • Vehicle substructures / motorsport
  • Boat construction
  • ...
Technical Data

Product Properties Epoxy System HP-E55L

  • Colouring: Slightly bluish / green
  • Mixing Ratio (by weight): 100 parts resin : 40 parts hardener
  • Mixing Ratio (by volume): 100 parts resin : 44 parts hardener
  • Mixed Viscosity: low viscous
  • Working Time (pot life): 55 minutes (100 g at 20°C)
  • Working temperature (optimum): 20 - 25 °C
  • Working temperature (minimum): 18 °C

Technical Data Sheet HP-E30S

Working Notes / Hazard Statements

Working notes and decision guidance for Epoxy Resins

Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.

Practical tips for epoxy resins (PDF)

Epoxy resin for boat building (PDF)

Decision guidance epoxy resins (PDF)
 

Hazard Statements

Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hazard pictograms GHS07Piktogramm-Gefahrenhinweis-Fisch

Hardener:
Danger
H302+H312 Harmful if swallowed or in contact with skin.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
Piktogramm-Gefahrenhinweis-AetzendPiktogramm-Gefahrenhinweis-Achtung

This product is compatible with (for example):

Covering Colour Pigments
Covering Colour Pigments | FD
The opaque colour pigments of the HP-FD series are used for colouring layers (gel and topcoats). They are suitable for laminating and casting resins.

Suitable for unsaturated polyester resins, epoxy resins, vinylester, polyurethan.
from 2,90 EUR
100 g/m² Unidirectional Carbonfabric | HP-U100/50C
100 g/m² Unidirectional Carbonfabric | HP-U100/50C...
Construction: 0°
Fibre: HT-Fibre
Weight: 100 g/m²
Width: 50 cm
13,98 EUR
Scissors "OPTIMA" | HP-L1054
Scissors "OPTIMA" | HP-L1054
Lenght: 28 cm
Blade lenght: 12 cm
Colour: blue
7,45 EUR
Priming Wax for porous surfaces
Priming Wax | HP-G
  • Wax primer for barely wettable and porous surfacesHighly effective
  • Flowable and silicon free wax
  • Foundation for Film Release Agent HP-PVA
  • Good release properties
  • Drying time approx. 5-15 minutes
from 13,50 EUR
15 mm Laminating brush | HP-L1107
15 mm Laminating brush | HP-L1107
Width: 15 mm
Bristle: Black China bristle
Stalk: Wood stalk
0,85 EUR

This product is similar to:

86 g/m² Glass Fabric "Silane" Plain | HP-P80E
86 g/m² Glass Fabric "Silane" Plain | HP-P80E...
Weight: 86 g/m²
Weave: Plain
Sizing: Silane
Width: 100 cm
5,65 EUR
200 g/m² Carbonfabric-Tape Plain (50 mm) | HP-P202C/050
200 g/m² Carbonfabric-Tape Plain (50 mm)...
Construction: Plain
Fibre: HT-Fibre
Weight: 200 g/m²
Width: 50 mm
4,57 EUR
High Performance Laminating Resin Epoxy HP-E56L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 5,50 EUR
25 cm Polyamid Laminating roller | HP-L1026
25 cm Polyamid Laminating roller | HP-L1026...
Width: 25 cm
Diameter: 6 cm
6,46 EUR

Customers who bought this product bought also the following products:

83 g/m² Peel Ply (Width: 4 cm) | HP-P83P4
83 g/m² Peel Ply (Width: 4 cm) | HP-P83P4...
Weight: 83 g/m²
Weave: Plain
Width: 4 cm
Roll lenght: 100 mtr.
Material: Nylon 6.6
15,00 EUR
Epoxy adhesive resin system for metal, wood, rubber, ceramics, rigid foams and many plastics
Adhesive System - Epoxy Resin | HP-E60K
The Epoxy Adhesive System HP-E60K is an unfilled, medium-viscosity combination of resin and hardener with medium reaction time.

Processing time of 60 minutes, Cold-hardening, medium viscous
from 10,90 EUR
280 g/m² Glass filament fabric Finish Twill | HP-T280EF-SOFT
280 g/m² Glass filament fabric Finish Twill...
Weight: 280 g/m²
Weave: Twill 2/2
Sizing: Finish (Soft, Finish)
Width: 100 cm
9,14 EUR
200 g/m² Carbonfabric-Tape Plain (100 mm) | HP-P202C/100
200 g/m² Carbonfabric-Tape Plain (100 mm)...
Construction: Plain
Fibre: HT-Fibre
Weight: 200 g/m²
Width: 100 mm
7,20 EUR