Subscribe to Newsletter

 
 
200 g/m² Carbonfabric-Tape Plain (50 mm) | HP-P202C/050
200 g/m² Carbonfabric-Tape Plain (50 mm) | HP-P202C/050
200 g/m² Carbonfabric-Tape Plain (50 mm) | HP-P202C/050

200 g/m² Carbonfabric-Tape Plain (50 mm) | HP-P202C/050

Product No.:
HP-P202C/050
ca. 1-3 days ca. 1-3 days (abroad may vary)
Stock:
440 Meters
Minimum order:
5
Sliding scale prices
5 Meters
per 4,57 EUR
10-20 Meters
per 3,83 EUR
25-45 Meters
per 3,32 EUR
50-95 Meters
per 3,07 EUR
> 95 Meters
per 2,71 EUR
4,57 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

200 g/m² Carbonfabric-Tape Plain (50 mm) | HP-P202C/050

Construction: Plain
Fibre: HT-Fibre
Weight: 200 g/m²
Width: 50 mm
 
Fibre orientation:
Warp: 5,0 y/cm (3K-200 tex)
Weft: 5,2 y/cm (3K-200 tex)
 
Technical Data Sheet Carbon Fabric HP-P200C
Areas of application: 
Tanks, pipes, hulls, model marking, boat construction, sport equipment, repairs & reinforcement, ...

► Laminate calculator
Here you can calculate specific values for your application.
Working Notes & Support
Working Notes:
In this instruction you will find tips & tricks for epoxy resins and fabrics in boatbuilding:
Boatbuilding (PDF)

further working notes you will find here


Decision guidance for Epoxy Resins:
Overview Epoxy Resins (PDF)


Working Notes:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator
Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Carbon Fabric 200g/m² Plain
TOP
200 g/m² Carbon Fabric Plain | HP-P200C
Weight: 200 g/m²
Weave: Plain
Width: 100 cm
27,89 EUR
Standard laminating Resin Epoxy HP-E55L
TOP
Laminating System - Epoxy Resin | HP-E55L...

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 5,50 EUR
Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR
Digital Table Scale (all steel panel) 5Kg/1g | VZ3006
Digital Table Scale 5Kg/1g | HP-VZ3006
  • Strain Gauge Precision Technology
  • Capacity:        up to 5kg
  • Readability:        1g
  • Display Modes:      g / oz
  • Key with Full Function:  ON/OFF/TARA/ZERO
  • Auto/Manual Shut-Off
  • Powered by AAA Battery (included)
  • Dimension (incl. weighing pan): 18 cm x 12 cm x 8 cm
16,65 EUR

Customers who bought this product bought also the following products:

Color Pastes according to RAL 350g | HP-FP
Color Pastes according to RAL 350g | HP-FP...
  • Liquid Pigment pastes for colouring according to RAL
  • Due to a high pigment concentration very efficient in consumption
  • Good colouring
  • Free from any solvent or VOC
  • Suitable for solvent free for epoxy resin and polyurethane systems​
from 14,90 EUR
Vacuum pump oil for our vacuum pumps
Vacuum Pump Oil
Coloring: Slightly yellowish 
Density at 15 °C: 869 kg/m³
Flashpoint COC: 220 °C
from 7,74 EUR
200 g/m² Carbonfabric-Tape Plain (100 mm) | HP-P202C/100
200 g/m² Carbonfabric-Tape Plain (100 mm)...
Construction: Plain
Fibre: HT-Fibre
Weight: 200 g/m²
Width: 100 mm
7,20 EUR
Epoxy Covering System
Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

from 5,50 EUR