Main page » Vacuum Technology » Non-woven absorber / Bleeder » 80 g/m² Non-woven absorber | HP-VP80P

80 g/m² Non-woven absorber | HP-VP80P

Name: 80 g/m² Non-woven absorber | HP-VP80P
SKU: HP-VP80P
Price: 2.69 EUR
Availability: InStock

Product No.:: HP-VP80P
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-4,5 m²: per 2,69 EUR
5-9,5 m²: per 2,32 EUR
10-24,5 m²: per 2,01 EUR
25-49,5 m²: per 1,42 EUR
50-99,5 m²: per 1,18 EUR
> 99,5 m²: per 1,06 EUR

2,69 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

80 g/m² Non-woven absorber | HP-VP80P

A non woven breather fabric with good drapeability. Effective for use in conjunction with components containing complex curvatures or acute radii. For taking up excess resin forced through the perforated film when the laminate is evacuated. It can be used effectively in single or multiple layers.

Material: 100% polyester (black)
Weight: 80 g/m²
Width: 80 cm

Technical data:

Temperatur resistance:	120°C
Thickness:	approx. 2mm (unpressed)
Weave:	needled

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks for the vacuum infusion process:
Vacuum infusion process (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of non-woven absorber:
Product information for safe handling (PDF)

This product is compatible with (for example):

70 g/m² Vacuum Bagging Film (Width: 400 cm)...

Material:	PA / PE / PA
Weight:	70 g/m²
Width:	400 cm
Colour:	transparent

0,88 EUR

Vacuum Flat Channel, 50 mm | HP-VZ1520

Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:

No print on the laminate
Excellent resin flow
Easy application and easy cut

1,82 EUR

200 g/m² Vaccum Infusion Mesh | HP-IM230/120...

Material:	HDPE
Weight:	200 g/m²
Width:	120 cm

4,14 EUR

83 g/m² Peel Ply Plain (Width: 100 cm)...

Weight:	83 g/m²
Weave:	Plain
Width:	100 cm
Material:	Nylon 6.6

3,75 EUR

Vacuum pump 220V | HP-VZ2000

Motor 220V / 50Hz
Engine Power 750W
Max. vacuum 2 mbar absolute (correspond to a pressure of more than 10 tons/m²)
Max. efficency by barometic pressure: 333 litre / min (= 20 m³/h)
Suitable for continuous operating range between 2 and 400 mbar absolute

1.629,00 EUR

This product is similar to:

70 g/m² Vacuum Bagging Film (Width: 400 cm)...

Material:	PA / PE / PA
Weight:	70 g/m²
Width:	400 cm
Colour:	transparent

0,88 EUR

105 g/m² Peel Ply Tape Twill (Width: 25 cm) | HP-T105P25

105 g/m² Peel Ply Twill (Width: 25 cm)...

Weight:	105 g/m²
Weave:	Twill
Width:	25 cm
Material:	Nylon 6.6

3,75 EUR

Y-Push Connector 10/10/10mm HP-VZ1350

- Push y-connector for easy connection
- both sides of the same diameter
- for tubes with a inside-diameter of 10mm

Compatible with vacuum hose:
HP-VZ1020

"Image similar"

1,44 EUR

50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060...

Material:	PA
Diameter:	38,20 cm
Weight:	50 g/m²
Width:	60 cm

on request

Customers who bought this product bought also the following products:

Mould Covering System, black - Epoxy Resin...

The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high hardness.

Mould covering system, 30 minutes working time

from 28,90 EUR

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR