Vacuum pump 220V | HP-VZ2000

Product No.:: HP-VZ2000
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Piece

1.629,00 EUR

incl. 19% tax excl. Shipping costs

Piece:

Description

Vacuum pump 220V | HP-VZ2000

Compact, low-maintenance, slide vane rotary vacuum pump, with circulating oil lubricartion applicable for Vacuum-Compression & Vacuum-Infusion. Ideal for the IMC/MTI-Process!

Motor: 220V / 50Hz
Engine: Power 750W
Weight: 19 kg

Technical data:

Max. valid gas- and ambience Temperature:	+12 up to +40°C
Noise level:	64 dB(A)

Max. vacuum: 2 mbar absolute (correspond to a pressure of more than 10 tons/m²)
Max. efficency by barometic pressure: 333 litre / min (= 20 m³/h)
Suitable for continuous operating range between 2 and 400 mbar absolute

Equipment:
Vane rotary vacuum pump incl. 4 pulse damper and 220V mains supply incl. on-off switch. Suction-sided with check valve, suction filter and two connecting adapters incl. stopcock . Delivered incl. oil, oil drain valve and users manual!

Connector 1:
PU-hose Outside diameter: 12 mm / Inside diameter: 8 mm (HP-VZ1040)

Connector 2:
PVC Steel Wire Reinforced Hose 16x3 mm (HP-VZ1480)

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Working Notes & Support

Instructions

IMC/MTI-Vacuum Process
In-Mould Coating

MTI - Hose

This product is compatible with (for example):

Vacuum Pump Oil

Coloring: Slightly yellowish
Density at 15 °C: 869 kg/m³
Flashpoint COC: 220 °C

from 7,74 EUR

PE hose for vacuum moulding standard | HP-VZ1010...

The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.