
Vacuum Pump Oil
Vacuum Pump Oil
- Product No.:
- Shipping time:
-
ca. 1-3 days (abroad may vary)
- Stock:
- Piece
Vacuum Pump Oil
The vacuum pump oil is suitable for our vacuum pumps HP-VZ1200 and HP-VZ2000. This shear-resistant, mineral oil-based vacuum pump oil is characterized by particularly good viscousity temperature-behaviour (high viscosity index) and covers the temperature application range of several viscosity classes of conventional oils. Due to its high thermal and oxidative stability, it offers potential for extended oil life and is also easy to filter. Highly effective additives ensure excellent wear and corrosion protection.Coloring: Slightly yellowish
Density at 15 °C: 869 kg/m³
Flashpoint COC: 220 °C
Technical data:
Viscosity class ISO VG: | 32 |
Kinematic viscosity at 40 °C: | 31,8 mm²/s |
Kinematic viscosity at 100 °C: | 6,2 mm²/s |
Stock point: | -36 °C |
This product is compatible with (for example):

The Epoxy-System HP-E28L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 28 minutes.
These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.
Shippingtime:
ca. 1-3 days
from 14,90 EUR
Shippingtime:
ca. 1-3 days
This product is similar to:

- Motor 220V / 50Hz
- Weight 5,4 kg
- Max. vacuum: 0,933 bar relative (complies to 20mbar absolute), (correspond to a pressure of more than 10 tons/m²)
- Max. efficency by barometic pressure: 67 litre / min (= 4 m³/h)
- Suitable for continuous operating range between 2 and 500 mbar absolute
Shippingtime:
ca. 1-3 days
889,50 EUR
Shippingtime:
ca. 1-3 days

- Motor 220V / 50Hz
- Engine Power 750W
- Max. vacuum 2 mbar absolute (correspond to a pressure of more than 10 tons/m²)
- Max. efficency by barometic pressure: 333 litre / min (= 20 m³/h)
- Suitable for continuous operating range between 2 and 400 mbar absolute
Shippingtime:
ca. 1-3 days
1.629,00 EUR
Shippingtime:
ca. 1-3 days

Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.
Advantages:
Advantages:
- No print on the laminate
- Excellent resin flow
- Easy application and easy cut
Shippingtime:
ca. 1-3 days
1,82 EUR
Shippingtime:
ca. 1-3 days