Subscribe to Newsletter

 
 
Vacuum pump 220V | HP-VZ1200
Vacuum pump 220V | HP-VZ1200
Vacuum pump 220V | HP-VZ1200

Vacuum pump 220V | HP-VZ1200

Product No.:
HP-VZ1200
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
889,50 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Vacuum pump 220V | HP-VZ1200

Compact, low-maintenance, slide vane rotary vacuum pump, with circulating oil lubricartion applicable for Vacuum-Compression & Vacuum-Infusion. Ideal for the IMC/MTI-Process!

Motor: 220V / 50Hz
Engine power: 150W
Weight: 5,4 kg
 
Technical data:
Max. valid gas- and ambience Temperature: +12 up to +40°C
Noise level: 52dB(A)
Eletrical execution Protection category: IP55
 
  • Max. vacuum: 0,933 bar relative (complies to 20mbar absolute), (correspond to a pressure of more than 10 tons/m²)
  • Max. efficency by barometic pressure: 67 litre / min (= 4 m³/h)
  • Suitable for continuous operating range between 2 and 500 mbar absolute

Equipment:
  • Vane rotary vacuum pump incl. pulse damper und 220V mains supply
  • Vacuum oil
  • 4 Vibration damper
  • Protective cap suction filter
  • Check valve
  • Suction filter
  • Connecting adapter for 12mm vacuum line
  • Operating instructions

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
Working Notes & Support
Instructions

IMC/MTI-Vacuum Process 
                                                                 In-Mould Coating

MTI - Hose                             		 

This product is compatible with (for example):

Vacuum pump oil for our vacuum pumps
Vacuum Pump Oil
Coloring: Slightly yellowish 
Density at 15 °C: 869 kg/m³
Flashpoint COC: 220 °C
from 7,74 EUR
Hose connector straight 8/8mm HP-VZ1300
Push Connector 8/8mm HP-VZ1300
- Push connector for easy connection
- both sides of the same diameter
- for tubes with a inside-diameter of 8mm
Compatible with vacuum hose:
HP-VZ1010   HP-VZ1040

"Image similar"

0,63 EUR
70 g/m² Vacuum Bagging Film (Width: 400 cm) | HP-VF70/400
70 g/m² Vacuum Bagging Film (Width: 400 cm)...
Material: PA / PE / PA
Weight: 70 g/m²
Width: 400 cm
Colour: transparent
0,88 EUR
30 g/m² Perforated Release Film | HP-RF30/130
30 g/m² Perforated Release Film | HP-RF30/130...
Material: HDPE
Weight: 30 g/m²
Width: 130 cm
Colour: Blue,  transparent
3,27 EUR
Vac Checker® Digital Vacuum Gauge | HP-VZ1440
Vac Checker® Digital Vacuum Gauge | HP-VZ1440...
Digital vacuum gauge from DD-Compound - VAC CHECKER
 
Field of application: Vacuum infusion
Measurement transducer: Absolute pressure sensor
Battery type: 2 mignon cells AA
299,00 EUR

This product is similar to:

Vacuum Flat Channel | HP-VZ1520
Vacuum Flat Channel, 50 mm | HP-VZ1520
Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:
  • No print on the laminate
  • Excellent resin flow
  • Easy application and easy cut
1,82 EUR
Vacuum Flat Channel | HP-VZ1530
Vacuum Flat Channel, 100 mm | HP-VZ1530
Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:
  • No print on the laminate
  • Excellent resin flow
  • Easy application and easy cut
2,33 EUR
PE hose for vacuum moulding standard | HP-VZ1010
PE hose for vacuum moulding standard | HP-VZ1010...
The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.
 
Available dimensions:
Material: PE
Outer-Ø: 10 mm
Inner-Ø: 8 mm
1,33 EUR

Customers who bought this product bought also the following products:

Lock valve with push-in connector 12/12 mm | HP-VZ1150
Lock valve with push-in connector 12/12 mm...
  • Lock valve for control the airflow by evacuation
  • Both sides of the same diameter
  • For tubes with a outside-diameter of 12 mm
14,65 EUR
Connector 12/12 mm | HP-VZ1060
Connector 12/12 mm | HP-VZ1060
  • Push-in connector for easy connection
  • Both sides of the same diameter
  • For tubes with a outside-diameter of 12 mm
4,51 EUR
PU hose for vacuum moulding flexible | HP-VZ1040
PU hose for vacuum moulding flexible | HP-VZ1040...

PU hose with high wall thickness and excellent flexibility. Use as resin-carrying line as well as reusable suctionin combination with the vacuum pump HP-VZ1200. Multiple use in combination with our connectors IQS standard.

Available dimensions:
Material: PU
Außen- Ø : 12 mm
Innen- Ø : 8 mm
3,55 EUR
Mould Covering Epoxy Resin HP-E25FB
Mould Covering System - Epoxy Resin | HP-E25FB...
The Epoxy Resin System HP-E25FB is an unfilled, thixotropic 2-component combination of resin and hardener with high sanding anpolishing properties-

Mould covering system, 25 minutes working time
from 39,40 EUR