Subscribe to Newsletter

 
 
30 g/m² Perforated Release Film | HP-RF30/130
Perforated Release Film
30 g/m² Perforated Release Film
Preview: 30 g/m² Perforated Release Film | HP-RF30/130
Preview: Perforated Release Film
Preview: 30 g/m² Perforated Release Film
30 g/m² Perforated Release Film | HP-RF30/130
Mobile Preview: 30 g/m² Perforated Release Film | HP-RF30/130
Mobile Preview: Perforated Release Film
Mobile Preview: 30 g/m² Perforated Release Film

30 g/m² Perforated Release Film | HP-RF30/130

Product No.:
HP-RF30/130
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-4,9 m²
per 3,27 EUR
5-9,9 m²
per 2,08 EUR
10-24,9 m²
per 1,49 EUR
25-49,9 m²
per 1,18 EUR
50-129,9 m²
per 1,01 EUR
> 129,9 m²
per 0,77 EUR
3,27 EUR

incl. 19% tax excl. Shipping costs

This product is compatible with (for example):

High Performance Laminating Resin Epoxy HP-E56L

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 5,50 EUR
High Performance Laminating System - Epoxy Resin | HP-E111L
The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E110L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 26,50 EUR
Scissors "OPTIMA" | HP-L1054
Lenght: 28 cm
Blade lenght: 12 cm
Colour: blue
7,45 EUR

This product is similar to:

Vacuum pump 220V | HP-VZ1200
  • Motor 220V / 50Hz
  • Weight 5,4 kg
  • Max. vacuum: 0,933 bar relative (complies to 20mbar absolute), (correspond to a pressure of more than 10 tons/m²)
  • Max. efficency by barometic pressure: 67 litre / min (= 4 m³/h)
  • Suitable for continuous operating range between 2 and 500 mbar absolute
889,50 EUR

Customers who bought this product bought also the following products:

MTI-Valve vacuum infusion | HP-VZ1450
  • Regulates itself the infusion of resin
  • No resin pooling at inlet point
  • Fibres are evenly covered with resin
  • Homogeneous laminate
  • Optimum fibre volume ratio
  • Highest quality of parts with reproducible results
  • Working hours and its costs can be saved
4,64 EUR
Epoxy infusion resin HP-E300RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 300 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 56,50 EUR