Subscribe to Newsletter

 
 
83 g/m² Peel Ply Plain (Width: 15 cm) | HP-P83P15
Peel ply tapes for laminating in various widths
Preview: 83 g/m² Peel Ply Plain (Width: 15 cm) | HP-P83P15
Preview: Peel ply tapes for laminating in various widths
83 g/m² Peel Ply Plain (Width: 15 cm) | HP-P83P15
83 g/m² Peel Ply Plain (Width: 15 cm) | HP-P83P15
Peel ply tapes for laminating in various widths
Mobile Preview: 83 g/m² Peel Ply Plain (Width: 15 cm) | HP-P83P15
Mobile Preview: Peel ply tapes for laminating in various widths

83 g/m² Peel Ply Plain (Width: 15 cm) | HP-P83P15

Product No.:
HP-P83P15-H
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1 Piece
per 43,73 EUR
2-3 Piece
per 37,49 EUR
4-6 Piece
per 32,49 EUR
> 6 Piece
per 28,74 EUR
43,73 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

83 g/m² Peel Ply Plain (Width: 15 cm) | HP-P83P15

It is made of Nylon and is added into epoxy- or polyester resins as the first and/or last layer of the construction. After hardening, just before further processing it has to be peeled of slowly and in a sharp angle. The Peel Ply leaves an evenly rough, lubricant film free and adhesive surface behind. Sanding or cleaning of the surface is not necessary before sticking or coating. The Peel Ply can´t remain in the construction therefore is a red or blue tracer thread woven into the fabric.

Weight: 83 g/m²
Weave: Plain
Width: 15 cm
Length: 100 mtr.
Material: Nylon 6.6 cleaned

Yarn type specifications:
Warp: 19 y/cm
Weft: 16 y/cm
 
Technical Data Sheet Carbon Fabric HP-P200C


Advantages of Peel Ply Fabric:

  • Accurate upper surface
  • A bit rough after tearing off, absolutely clean and free of dust
  • Ideal subsoil for bonding or further laminating/painting
  • Saves time, no need to grind with sand-paper or removing of grinding dust
In some cases it is desired to have a slip resistance of the component (e.g. stand space of surf boards, boat decks). The surface is after tearing the Peel Ply off ready for use.


► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
 
Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with reinforcement fabrics:
Boat Building (PDF)

further working notes you will find here

 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

 

Characteristics of Peel Ply Constructions:

Peel Ply are available in plain or twill. The important characteristics you will find below:
 
Plain
Plain
  • The simplest weave
  • Very slip-resistant
  • Bad drapability
  • Suitable for flat plates or easy moulds

Twill
Twill
  • Diagonally running lines are characteristic
  • Better drapability than plain weave
  • Less slip-resistant
  • Suitable for complicated geometries
Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of peel ply:
Product information for safe handling (PDF)

This product is compatible with (for example):

Spray adhesive 400 ml | HP-FIX400
Spray adhesive 400 ml | HP-FIX400
  • To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
  • Application in combination with the epoxy resins from HP-Textiles
  • Excellent spray control with adjustable spray button and dosage valve
  • Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials
11,84 EUR
11,84 EUR per pcs.
Hose connector straight 8/8mm HP-VZ1300
Push Connector 8/8mm HP-VZ1300
- Push connector for easy connection
- both sides of the same diameter
- for tubes with a inside-diameter of 8mm
Compatible with vacuum hose:
HP-VZ1010   HP-VZ1040

"Image similar"

0,63 EUR
infusionsystem resin and hardener HP-E200GL
Infusion System -Epoxy Resin | HP-E200GL
The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 5,90 EUR
30 g/m² Perforated Release Film | HP-RF30/130
30 g/m² Perforated Release Film | HP-RF30/130...
Material: HDPE
Weight: 30 g/m²
Width: 130 cm
Colour: Blue,  transparent
3,27 EUR
High Performance Laminating Resin Epoxy HP-E56L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 5,50 EUR

This product is similar to:

PU hose for vacuum moulding flexible | HP-VZ1040
PU hose for vacuum moulding flexible | HP-VZ1040...

PU hose with high wall thickness and excellent flexibility. Use as resin-carrying line as well as reusable suctionin combination with the vacuum pump HP-VZ1200. Multiple use in combination with our connectors IQS standard.

Available dimensions:
Material: PU
Außen- Ø : 12 mm
Innen- Ø : 8 mm
3,55 EUR

Customers who bought this product bought also the following products:

83 g/m² Peel Ply Plain (Width: 10 cm) | HP-P83P10
83 g/m² Peel Ply Plain (Width: 10 cm) | HP-P83P10...
Weight: 83 g/m²
Weave: Plain
Width: 10 cm
Roll length: 100 mtr.
Material: Nylon 6.6
on request
Mould Release Agent for Epoxy and Polyester
Mould Release Agent | HP-BM17
  • Silicon free dispersion of wax in a dissolver mixture
  • Operating temperature up to 80°C
  • Sprayable, contains dissolver for epoxy and polyester resin
  • Suitable for smooth and dense undergrounds and in connection with the Film Release Agent HP-PVA
from 8,90 EUR
One Way-Nitrile-Gloves powdered
Nitrile-Gloves "powdered"
Quality: Nitrile (high quality & resistant)
Size: L, XL
Colour: Blue or White
from 3,24 EUR
Cotton flocks | HP-BF1
Cotton flocks | HP-BF1
  • Thickener, viscosity control
  • Reinforcement of splices, adhesive beads
  • In combination with glass fiber chips (HP-GS6) for coupling layers in mold making
from 3,50 EUR