Subscribe to Newsletter

 
 
200 g/m² Vaccum Infusion Mesh | HP-IM230/120
200 g/m² Vaccum Infusion Mesh | HP-IM230/120
200 g/m² Vaccum Infusion Mesh | HP-IM230/120
Preview: 200 g/m² Vaccum Infusion Mesh | HP-IM230/120
Preview: 200 g/m² Vaccum Infusion Mesh | HP-IM230/120
Preview: 200 g/m² Vaccum Infusion Mesh | HP-IM230/120
200 g/m² Vaccum Infusion Mesh | HP-IM230/120
200 g/m² Vaccum Infusion Mesh | HP-IM230/120
200 g/m² Vaccum Infusion Mesh | HP-IM230/120
200 g/m² Vaccum Infusion Mesh | HP-IM230/120
Mobile Preview: 200 g/m² Vaccum Infusion Mesh | HP-IM230/120
Mobile Preview: 200 g/m² Vaccum Infusion Mesh | HP-IM230/120
Mobile Preview: 200 g/m² Vaccum Infusion Mesh | HP-IM230/120

200 g/m² Vaccum Infusion Mesh | HP-IM230/120

Product No.:
HP-IM230/120
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-4,9 m²
per 4,14 EUR
5-9,9 m²
per 3,55 EUR
10-24,9 m²
per 2,96 EUR
25-59,9 m²
per 2,59 EUR
60-119,9 m²
per 2,25 EUR
> 119,9 m²
per 1,77 EUR
4,14 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

200 g/m² Vaccum Infusion Mesh | HP-IM230/120

The Infusion Mesh is lay flat between Vacuum Film and Release Film to ensure the even flow of resin throughout the mould surface. It is generally use in green colour for better visual clarity or flow of the resin. After the resin is cured it is removed from the surface of the mould area.

Material: HD-PE
Weight: 200 g/m²
Width: 120 cm
 
Technical data:
Temperatur resistance:   120°C
Thickness: 1 mm
Colour: Green
Drapability: Not good
 
Technical Data Sheet Perforated Release HP-IM230/120
► Laminate calculator
Here you can calculate specific values for the vacuum infusion.


Delivery NotesDelivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.
Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks for the vacuum infusion process:
Vacuum infusion process (PDF)

 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

This product is compatible with (for example):

High Performance Laminating System - Epoxy Resin | HP-E111L
High Performance Laminating System - Epoxy...
The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
from 26,50 EUR
30 g/m² Perforated Release Film | HP-RF30/130
30 g/m² Perforated Release Film | HP-RF30/130...
Material: HDPE
Weight: 30 g/m²
Width: 130 cm
Colour: Blue,  transparent
3,27 EUR
infusionsystem resin and hardener HP-E200GL
Infusion System -Epoxy Resin | HP-E200GL
The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
from 5,90 EUR
PE hose for vacuum moulding standard | HP-VZ1010
PE hose for vacuum moulding standard | HP-VZ1010...
The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.
 
Available dimensions:
Material: PE
Outer-Ø: 10 mm
Inner-Ø: 8 mm
1,33 EUR
Scissors "OPTIMA" | HP-L1054
Scissors "OPTIMA" | HP-L1054
Lenght: 28 cm
Blade lenght: 12 cm
Colour: blue
7,45 EUR

This product is similar to:

T-hose connector straight 10/10/10mm HP-VZ1330
T-Push Connector 10/10/10mm HP-VZ1330
- Push t-connector for easy connection
- both sides of the same diameter
- for tubes with a inside-diameter of 10mm
Compatible with vacuum hose: 
HP-VZ1020    
"Image similar"
 
1,31 EUR
Resin supply hose
Resin supply hose for vacuum infusion SP-VZ1480...
Resin supply hose for the Blade Runner®
PVC Steel Wire Reinforced Hose 16x3mm

Inner  diameter:    16mm
Outer diameter:    22mm
from 69,00 EUR
Y-Connector 10/10/10 mm | HP-VZ1120
Y-Connector 10/10/10 mm | HP-VZ1120
  • Push-in Y-connector for easy connection
  • All sides of the same diameter
  • For tubes with a outside-diameter of 10 mm
5,38 EUR
80 g/m² Non-woven absorber | HP-VP80P
80 g/m² Non-woven absorber | HP-VP80P
Material: 100% polyester (black)
Weight: 80 g/m²
Width: 80 cm
2,69 EUR

Customers who bought this product bought also the following products:

Triplex Mesh for Vacuum Processes | HP-TX275/152
Triplex Mesh for Vacuum Processes | HP-TX275/152...
Triplex Mesh combines three auxiliary vacuum materials in one:
peel ply, perforated release film and mesh.
Material: HDPE
Weight: 275 g/m²
Width: 152 cm
Colour: blue, white, red
7,74 EUR
50 g/m² Vacuum Bagging Film Tube | HP-VFT50/090
50 g/m² Vacuum Bagging Film Tube | HP-VFT50/090...
Material: PA
Diameter: 57 cm
Weight: 50 g/m²
Width: 90 cm
3,80 EUR
Spray adhesive 400 ml | HP-FIX400
Spray adhesive 400 ml | HP-FIX400
  • To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
  • Application in combination with the epoxy resins from HP-Textiles
  • Excellent spray control with adjustable spray button and dosage valve
  • Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials
11,84 EUR
11,84 EUR per pcs.
Vacuum Flat Channel | HP-VZ1520
Vacuum Flat Channel, 50 mm | HP-VZ1520
Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:
  • No print on the laminate
  • Excellent resin flow
  • Easy application and easy cut
1,82 EUR