Subscribe to Newsletter

 
 
PU hose for vacuum moulding flexible | HP-VZ1030
PU hose for vacuum moulding flexible | HP-VZ1030
PU hose for vacuum moulding flexible | HP-VZ1030

PU hose for vacuum moulding flexible | HP-VZ1030

Product No.:
HP-VZ1030
ca. 1-3 days ca. 1-3 days (abroad may vary)
Minimum order:
5
Sliding scale prices
5 Meters
per 3,09 EUR
10-20 Meters
per 2,77 EUR
25-45 Meters
per 2,30 EUR
> 45 Meters
per 2,01 EUR
3,09 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

PU hose for vacuum moulding flexible | HP-VZ1030

PU hose with high wall thickness and excellent flexibility. Use as resin-carrying line as well as reusable suctionin combination with the vacuum pump HP-VZ1200. Multiple use in combination with our connectors IQS standard.
 

Technical data:
Material: Polyurethane
Outer-diameter: 10 mm
Inner-diameter: 6,5 mm
Temperature range: -35 °C up to max. +60 °C
Shore-Hardness: 97 A
Colour: transparent

Areas of applications and features:

  • Small bending radius by special flexibility
  • Very good flexibility at low temperature and recovery characteristics
  • Kink and corrosion proof
  • Resistant against aliphatic hydrocarbons and most lubrications
  • Non-aging in oxigene and ozone
  • Reusable

This product is compatible with (for example):

83 g/m² Peel Ply Plain (Width: 100 cm) | HP-P83P100RB
83 g/m² Peel Ply Plain (Width: 100 cm)...
Weight: 83 g/m²
Weave: Plain
Width: 100 cm
Material: Nylon 6.6
4,17 EUR
Hose Clamp Squeezee® HP-VZ1400
Tube clip Squeezee® HP-VZ1400

The tube clip Squeezee® allows an exact dosing of the resin flow and easy disconnecting of the resin line in the vacuum infusion.

· Ideal for disconnecting all tube lines
· Exact dosing of the resin flow is possible
· Suitable for tubes up to 15 mm outer diameter
· very easy to handle

32,90 EUR
70 g/m² Vacuum Bagging Film (Width: 800 cm) | HP-VF70/800
70 g/m² Vacuum Bagging Film (Width: 800 cm)...
Material: PA / PE / PA
Weight: 70 g/m²
Width: 800 cm
Colour: Yellow, transparent
0,88 EUR
Sealant Tape with 210 °C Temperatue resistance | HP-ST10X3/210
Sealant Tape with 210 °C Temperatue resistance...
Material: Butyl Rubber
Width: 12 mm
Thickness: 3 mm
Length: 12,5 mtr.
11,60 EUR
Scissors "easypro" stainless steel | HP-L1055
Scissors "easypro" stainless steel | HP-L1055...
Length: 28 cm
Colour: Black / Red
6,37 EUR
Nitril-gloves | HP-L1053
Nitril-gloves | HP-L1053
Size: 10
Norm: EN 388 4121
Colour: yellow
2,28 EUR

Customers who bought this product bought also the following products:

Mould Covering thixotropic Epoxy Resin
Mould Covering System, blue-grey - Epoxy...
  • High-quality mould covering resin
  • Non-drip, without run-off on vertical surfaces -high thixotropic, blue-grey coloured
  • Vacuum degassed
  • User friendly mixing ratios (100:10)
  • For abrasion-and breaking resistance surfaces with good thermal conductivity.
  • Innovative formulation, free of DETA1 with high styrene resistance.
from 29,90 EUR
Epoxy infusion resin HP-E120RI
Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR
Chopped glass fibre | HP-GS6
Chopped Glass Fibres 6 mm | HP-GS6
  • For an increased tensile, compressive and flexural strength
  • Mixture remains flowable
  • For moulding material
  • Reinforcement of gluing spots / adhesive beading
  • In combination with cotton flocks (HP-BF1) suitable for coupling layers in mould making
from 2,59 EUR
Epoxy infusion resin HP-E300RI
Infusion System - Epoxy Resin | HP-E300RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 300 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 56,50 EUR