Subscribe to Newsletter

 
 
Nitril-gloves | HP-L1053
Nitril-gloves | HP-L1053

Nitril-gloves | HP-L1053

Product No.:
HP-L1053
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-9 Piece
per 2,28 EUR
> 9 Piece
per 1,89 EUR
2,28 EUR

incl. 19% tax excl. Shipping costs

This product is compatible with (for example):

Epoxy Adhesive HP-E120K
The Epoxy Adhesive System HP-E120K is an unfilled, medium-viscosity combination of resin and hardener with medium reaction time.

Processing time of 120 minutes,
adhere metal, wood, rubber, ceramic, rigid foams and many plastics
from 10,90 EUR
Laminating Resin Epoxy HP-E28L

The Epoxy-System HP-E28L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 28 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR

This product is similar to:

Sanding Block HP-SB280
Flat sanding surface, two grits one side coarse and other side fine

Dims: 280 x 51 mm approx.
Grit: 180 coarse & 320 fine
39,90 EUR
Polyester resin based on orthophtalic acid -Resin & Hardener- | HP-P21LPG

  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Wax free, tacky for further bonds / layers
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
from 43,50 EUR
PU hose for vacuum moulding flexible | HP-VZ1030

PU hose with high wall thickness and excellent flexibility. Use as resin-carrying line as well as reusable suctionin combination with the vacuum pump HP-VZ1200. Multiple use in combination with our connectors IQS standard.

Available dimensions:
Material: PU
Außen- Ø : 10 mm
Innen- Ø : 6,5 mm
3,09 EUR

Customers who bought this product bought also the following products:

Epoxy Priming resin HP-E80FS

The Epoxy System E80FS is an unfilled, low-viscosity combination of resin and hardener with high  adhesion to several surfaces.
- Primer, Adhesion Promoter and Corrosion Protection -

 

from 16,90 EUR
Epoxy resin multi-purpose system for laminating, gluing and many other applications
The Epoxy-System HP-E25KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with short working time (pot life). It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould making, Applicable from 5°C temperature
from 6,90 EUR