Main page » Vacuum Technology » Sealant Tape » Sealant Tape with 210 °C Temperatue resistance | HP-ST12X3/210

Preview: Sealant Tape with 210 °C Temperatue resistance | HP-ST10X3/210

Sealant Tape with 210 °C Temperatue resistance | HP-ST12X3/210

Mobile Preview: Sealant Tape with 210 °C Temperatue resistance | HP-ST10X3/210

Sealant Tape with 210 °C Temperatue resistance | HP-ST12X3/210

Product No.:: HP-ST12X3/210
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Piece

Sliding scale prices

1-4 Piece: per 11,60 EUR
5-9 Piece: per 10,59 EUR
10-21 Piece: per 9,40 EUR
22-43 Piece: per 8,21 EUR
44-109 Piece: per 7,74 EUR
> 109 Piece: per 7,02 EUR

11,60 EUR

incl. 19% tax excl. Shipping costs

Piece:

Description

Sealant Tape with 210°C Temperatue resistance | HP-ST12X3/210

HP-ST12X3/210 is a polyvalent sealant tape recommended for high temperature cures up to 210 °C (autoclave cycles). It exhibits high tack and excellent adhesion. Economic and ideal to use on metal or composite tools, this sealant tape is easy to release from the tools: no contamination of the mould surface (it is recommended to remove the tape as soon as it has cooled down to room temperature).

Material: Butyl Rubber
Width: 12 mm
Thickness: 3 mm
Length: 12,5 mtr.
Colour: yellow
Max. temperature: 210 °C

Areas of applications and features:

Permanently elastic Sealant Tape of synthetic rubber for fastening all types of vacuum films to the edges of the mould
Good adhesion on aluminium, steel, wood, glass, plastic incl. PE

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks for the vacuum infusion process:
Vacuum infusion process (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of sealant tape:
Product information for safe handling (PDF)

This product is compatible with (for example):

44 g/m² Perforated Release Film | HP-RF44/156...

Material:	HDPE
Weight:	44 g/m²
Width:	156 cm
Colour:	Blue, transparent

3,27 EUR

T-Connector 10/10/10 mm | HP-VZ1070

Push-in T-connector for easy connection
All sides of the same diameter
For tubes with a outside-diameter of 10 mm

5,69 EUR

Light stabilizer / Anti-yellowing additive...

BEL91 is added as light stabilizer into ready mixed systems
Solution of functional amines

The HP-BEL91 improves anti-yellowing of epoxy and paints significant.

from 4,95 EUR

Casting System - Epoxy Resin | HP-E45GA

Foundry patterns, die plates, reproduction patterns
Building small moulds and castings with slightly yellow colour
Encapsulation of decorative elements
Gevelling compound

from 11,50 EUR

Hard paper epoxy resin mixing cup | HP-L1068

mixing cup 100 ml | HP-L1068

Material:	hard paper with PE coating, round
Volume:	100 ml
Quantity/Package:	25 or 50 pieces per package

0,13 EUR

This product is similar to:

70 g/m² Vacuum Bagging Film (Width: 400 cm)...

Material:	PA / PE / PA
Weight:	70 g/m²
Width:	400 cm
Colour:	transparent

0,88 EUR

T-Connector 10/10/10 mm | HP-VZ1070

Push-in T-connector for easy connection
All sides of the same diameter
For tubes with a outside-diameter of 10 mm

5,69 EUR

T-hose connector straight 8/8/8mm HP-VZ1320

T-Push Connector 8/8/8mm HP-VZ1320

- Push t-connector for easy connection
- both sides of the same diameter
- for tubes with a inside-diameter of 8mm

Compatible with vacuum hose:
HP-VZ1010		HP-VZ1040

"Image similar"

1,24 EUR

Tube clip Squeezee® HP-VZ1400

The tube clip Squeezee® allows an exact dosing of the resin flow and easy disconnecting of the resin line in the vacuum infusion.

· Ideal for disconnecting all tube lines
· Exact dosing of the resin flow is possible
· Suitable for tubes up to 15 mm outer diameter
· very easy to handle

32,90 EUR

Customers who bought this product bought also the following products:

Infusion System - Epoxy - Resin component...

The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose. A special feature of this series is a high initial glass transition temperature (Tg) by hardening at room temperature.

Vacuum Infusion, Pressure Injection

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-HE3000RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 40,50 EUR

Infusion System - Epoxy - Hardener component...

The hardener HP-HTE300GL allows a pot-life of 300 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

from 16,50 EUR

Chopped Glass Fibres 6 mm | HP-GS6

For an increased tensile, compressive and flexural strength
Mixture remains flowable
For moulding material
Reinforcement of gluing spots / adhesive beading
In combination with cotton flocks (HP-BF1) suitable for coupling layers in mould making

from 2,59 EUR

525 g/m² Unidirectional-Carbonfabric-Tape...

Construction:	0°
Fibre:	HT-Fibre
Weight:	525 g/m²
Width:	50 mm

5,30 EUR