Subscribe to Newsletter

 
 
T-hose connector straight 8/8/8mm HP-VZ1320
T-Push Connector 8/8/8mm HP-VZ1320
T-hose connector straight 8/8/8mm HP-VZ1320

T-Push Connector 8/8/8mm HP-VZ1320

Product No.:
HP-VZ1320
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-4 Piece
per 1,24 EUR
5-9 Piece
per 1,17 EUR
10-24 Piece
per 1,11 EUR
25-49 Piece
per 1,05 EUR
> 49 Piece
per 0,99 EUR
1,24 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description
T-Connector 8/8/8mm

Description:
- Push t-connector for easy connection
- both sides of the same diameter
- for tubes with a inside-diameter of 8mm

Technical data:
Material: plastic
Temperature range: 0°C to max. +80°C
Compatible with vacuum hose:
HP-VZ1010   HP-VZ1040

"Image similar"

This product is compatible with (for example):

Sealant Tape with 210 °C Temperatue resistance | HP-ST10X3/210
Sealant Tape with 210 °C Temperatue resistance...
Material: Butyl Rubber
Width: 12 mm
Thickness: 3 mm
Length: 12,5 mtr.
11,60 EUR
83 g/m² Peel Ply Plain (Width: 20 cm) | HP-P83P20
83 g/m² Peel Ply Plain (Width: 20 cm) | HP-P83P20...
Weight: 83 g/m²
Weave: Plain
Width: 20 cm
Roll length: 100 mtr.
Material: Nylon 6.6
58,31 EUR
75 g/m² Vacuum Bagging Film (Width: 260 cm) | HP-VF75/260
75 g/m² Vacuum Bagging Film (Width: 260 cm)...
Material: PA / PE / PA
Weight: 75 g/m²
Width: 260 cm
Colour: transparent, yellow
4,15 EUR
80 g/m² Non-woven absorber | HP-VP80P
80 g/m² Non-woven absorber | HP-VP80P
Material: 100% polyester (black)
Weight: 80 g/m²
Width: 80 cm
2,69 EUR
Laminating Resin Epoxy HP-E28L
Laminating System - Epoxy Resin | HP-E28L...

The Epoxy-System HP-E28L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 28 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR

This product is similar to:

Hose Clamp Squeezee® HP-VZ1400
Tube clip Squeezee® HP-VZ1400

The tube clip Squeezee® allows an exact dosing of the resin flow and easy disconnecting of the resin line in the vacuum infusion.

· Ideal for disconnecting all tube lines
· Exact dosing of the resin flow is possible
· Suitable for tubes up to 15 mm outer diameter
· very easy to handle

32,90 EUR
T-Connector 10/10/10 mm | HP-VZ1070
T-Connector 10/10/10 mm | HP-VZ1070
  • Push-in T-connector for easy connection
  • All sides of the same diameter
  • For tubes with a outside-diameter of 10 mm
5,69 EUR
Stud to close 12 mm | HP-VZ1170
Stud to close 12 mm | HP-VZ1170
  • Stud to close up connectors
  • For connectors with a inside-diameter of 12 mm
1,49 EUR

Customers who bought this product bought also the following products:

Carbon Fabric 160 g/m² Twill | HP-T240/050C
50cm - 245 g/m² Carbon Fabric Twill (Width:...
Weight: 245 g/m²
Weave: Twill 2/2
Width: 50 cm
33,69 EUR
600 g/m² Glass fabric Bidiagonal | HP-B600E
600 g/m² Glass fabric Bidiagonal | HP-B600E...
Complete rolls of 31,75 m²
 
Per roll:  31,75 m² or 63,5 m²
Construction: Bidiagonal +/-45°
Weight: 600 g/m²
Width: 127 cm
3,44 EUR
Mould Covering Epoxy Resin HP-E25FB
Mould Covering System - Epoxy Resin | HP-E25FB...
The Epoxy Resin System HP-E25FB is an unfilled, thixotropic 2-component combination of resin and hardener with high sanding anpolishing properties-

Mould covering system, 25 minutes working time
from 39,40 EUR
Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR