Main page » Vacuum Technology » Perforated Release Film » 44 g/m² Perforated Release Film | HP-RF44/156

Preview: 44 g/m² Perforated Release Film | HP-RF44/156

44 g/m² Perforated Release Film | HP-RF44/156

Mobile Preview: 44 g/m² Perforated Release Film | HP-RF44/156

44 g/m² Perforated Release Film | HP-RF44/156

Product No.:: HP-RF44/156
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-4,9 m²: per 3,27 EUR
5-9,9 m²: per 2,08 EUR
10-24,9 m²: per 1,49 EUR
25-49,9 m²: per 1,18 EUR
50-155,9 m²: per 1,01 EUR
> 155,9 m²: per 0,77 EUR

3,27 EUR

incl. 19% tax excl. Shipping costs

Description

44 g/m² Perforated Release Film | HP-RF44/156

High-tensible perforated Release Film. Ideal for use in vacuum bag / autoclave processing of composites. Suitable for use with polyester, epoxy and phenolic resin systems. Basic purpose of the release film is to ensure the proper release of the helping material use for vacuum bagging. The Release Film is placed directly on the peel ply in contact with the laminate. It separates the laminate from breather / bleeder fabrics, which have no release characteristics.

Material: HDPE
Weight: 44 g/m²
Width: 156 cm

Technical data:

Temperatur resistance:	127°C
Thickness:	45µm
Colour:	Blue, transparent
Elongation at break:	>210%

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 1 m² only folded up. More than 5 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks for the vacuum infusion process:
Vacuum infusion process (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

This product is compatible with (for example):

infusionsystem resin and hardener HP-E200GL

Infusion System -Epoxy Resin | HP-E200GL

The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,90 EUR

PE hose for vacuum moulding standard | HP-VZ1010...

The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.

Available dimensions:
Material:	PE
Outer-Ø:	10 mm
Inner-Ø:	8 mm

1,33 EUR

Spray adhesive 400 ml | HP-FIX400

To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
Application in combination with the epoxy resins from HP-Textiles
Excellent spray control with adjustable spray button and dosage valve
Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials

11,84 EUR
11,84 EUR per pcs.

High performance laminating system HP-E29L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 26,50 EUR

Sealant Tape | HP-ST12X3/80

Material:	Butyl Rubber
Width:	12 mm
Thickness:	3 mm
Length:	15 mtr.

10,41 EUR

This product is similar to:

Lock valve with push-in connector 10/10 mm...

Lock valve for control the airflow by evacuation
Both sides of the same diameter
For tubes with a outside-diameter of 10 mm

13,98 EUR

Y-Push Connector 10/10/10mm HP-VZ1350

- Push y-connector for easy connection
- both sides of the same diameter
- for tubes with a inside-diameter of 10mm

Compatible with vacuum hose:
HP-VZ1020

"Image similar"

1,44 EUR

Vacuum Flat Channel, 100 mm | HP-VZ1530

Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:

No print on the laminate
Excellent resin flow
Easy application and easy cut

2,33 EUR

Sealant Tape with 210 °C Temperatue resistance...

Material:	Butyl Rubber
Width:	12 mm
Thickness:	3 mm
Length:	12,5 mtr.

11,60 EUR

Customers who bought this product bought also the following products:

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR

Carbon Fabric 245 g/m² Twill | HP-T240/150C

245 g/m² Carbon Fabric Twill | SP-T240/150C...

Weight:	245 g/m²
Weave:	Twill 2/2
Width:	150 cm

instead 33,92 EUR
only 27,14 EUR
You save 20%

206 g/m² Glass Fabric "Finish" Plain | HP-P200/127EF...

Weight:	206 g/m²
Weave:	Plain
Sizing:	Finish
Width:	127 cm

4,91 EUR

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,50 EUR