High Performance Laminating System - Epoxy Resin | HP-E29L
High Performance Laminating Resin, Better Properties | Epoxy Resin HP-E29L
The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
Features & Benefits
- Very good wetting properties of the reinforcing fibres
- Cold setting, de-mouldable at room temperature
- Free of solvents and fillers
- Improved physiological compatibility (no R62 labelling)
- Practically shrink-free curing
- Temperature resistance (Tg Max) up to 93°C
- Free of Nonylphenol and DETA
- Special formulation supports faster curing and increased strength, especially at higher temperatures
- Individual colouring is available upon request
- Excellent adhesion to the In-Mould Coating of HP-Textiles
- In total better characteristic values of approx. 10% (Tg MAX, tensile strength etc.) than those of standard systems!
As impregnating and laminating resins in the areas of:
- Mould-making and fixture construction, Industrial parts
- Construction of sports equipment, model making
- Orthopaedic
- Vehicle substructures / motorsport
- Boat construction
- Aircraft construction (ultralight aviation)
- ...
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping.
A technically comparable alternative is our HP-E28L. This epoxy resin can be shipped to private customers in Germany without any restrictions.
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping.
A technically comparable alternative is our HP-E28L. This epoxy resin can be shipped to private customers in Germany without any restrictions.
Product Properties Epoxy System HP-E29L
- Colouring: Slightly bluish / green
- Mixing Ratio (by weight): 100 parts resin : 40 parts hardener
- Mixing Ratio (by volume): 100 parts resin : 44 parts hardener
- Mixed Viscosity: low viscous
- Working Time (pot life): 25 minutes (100 g at 20 °C)
- Working temperature (optimum): 15 - 25 °C
- Working temperature (minimum): 15 °C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Danger
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
H302+H312 Harmful if swallowed or in contact with skin.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
.jpg "Preview: 160 g/m² Carbon Fabric Twill | HP-T160/120C")
.jpg "Preview: 160 g/m² Carbon Fabric Twill | HP-T160/120C")
.jpg "Preview: 160 g/m² Carbon Fabric Twill | HP-T160/120C")
.jpg "Preview: 160 g/m² Carbon Fabric Twill | HP-T160/120C")
.jpg "Preview: 200 g/m² Carbon Fabric Twill 2/2 Spread Tow | SP-T201SC")
.jpg "Preview: 200 g/m² Carbon Fabric Twill 2/2 Spread Tow | SP-T201SC")
