Subscribe to Newsletter

 
 
Coating Epoxy System HP-E30TDS
Coating - Laminating System - Transparent - Epoxy Resin | HP-E30TDS
Coating Epoxy System HP-E30TDS

Coating - Laminating System - Transparent - Epoxy Resin | HP-E30TDS

Product No.:
HP-E30TDS
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
from 11,90 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Coating, Laminating Resin, Transparent, Thixotropic | Epoxy Resin HP-E30TDS

The Epoxy-System HP-E30TDS is a two-component combination of resin and hardener with medium working time (pot life). It is versatile for high quality surface coatings.

Features & Benefits:

  • Sealing for wood, metal, several plastics (especially frp), screed and concrete
  • Very good adhesive properties, high abrasion-reasistance
  • Very high chemical and mechanical resistance
  • Distinct osmosis protection
  • Free of solvents, can be thinned with HP-XB upon demand (maximum up to 5%)

Used as high quality surface coating in following areas
  • Boatbuilding, (especially for osmosis protection in underwater areas)
  • Outdoor AND INDOOR swimming pools, water tanks, fish and aquaculture ponds
  • Roofs and rooftops
  • Balcony sealing
  • Agricultural and industrial coantings
  • As surface for low temperature moulds (< 50°C)

Available in several colours or clear, adjustable with color paste HP-FP to RAL.
To increase color stability, we recommend the addition of our UV-Absorber HP-BEL91.

In order to achieve best results we recommend the use in combination with our primer / sealer (HP-E80FS) and / or laminating resin (HP-E30TLS).
Technical Data

Product Properties Epoxy System HP-E30TDS

  • Colouring: transparent
  • Mixing Ratio (by weight): 100 parts resin : 60 parts hardener
  • Mixed Viscosity: thixotropic
  • Working Time (pot life): 30 minutes (100g at 20°C)
  • Working temperature (optimum): 20 - 25 °C
  • Working temperature (minimum, not below): 15 °C

Technical Data Sheet HP-E30S

Working Notes / Hazard Statements

Working notes and decision guidance for Epoxy Resins

Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.

Practical tips for epoxy resins (PDF)

Epoxy resin for boat building (PDF)

Decision guidance epoxy resins (PDF)
 

Hazard Statements

Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hazard pictograms GHS07Piktogramm-Gefahrenhinweis-Fisch

Hardener:
Danger
H302+H312 Harmful if swallowed or in contact with skin.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
Piktogramm-Gefahrenhinweis-AetzendPiktogramm-Gefahrenhinweis-Achtung

This product is compatible with (for example):

Carbon braided Sleeve 3K (D= 35 mm at 45°) | HP-BSC035/96/3
Carbon braided Sleeve 3K (D= 35 mm at 45°)...
Material: 3K 200tex (HT-Fibre)
Number of ends: 96
Diameter at 45°: 35 mm
Area of applications: 15 - 45 mm

**Offered and sold in stretched condition!**
7,54 EUR
Neon Glitter for epoxy resins
Neon Glitter Set 5 x 3 g | GL-5
  • Suitable for clear epoxy casting resins
  • Shades: orange, red, green, yellow, blue
  • Intensive reflection effect
  • Bright neon colours
​Neon glitter decoration sprinkle in useful sprinkle tubes
4,90 EUR
0,33 EUR per g
Stirrer 20cm plastic
20 cm plastic Stirrer | HP-L1120
Colour: Red
Material: Plastic
Size: 20 cm incl hole and retaining hooks
0,83 EUR
Plastic cup | HP-L1069
Mixing cup 300 ml | HP-L1069
Material: hard paper with PE coating, round
Volume: 300 ml
Quantity/Package: 25 or 50 pieces per package
0,25 EUR
Degassing additive | HP-BEL51
Degassing additive | HP-BEL51
  • HP-BEL51 is a defoaming and degassing agent
  • Solution of functional polymers and polysiloxanes

Stir it preferably into the base resin before adding other components. It is also possible to add the additive to the finished systems.

from 3,45 EUR

This product is similar to:

5 Needle Files Set HP-NF-1H
14cm Needle Files - Perma-Grit®
Unlike conventional Needle Files Perma-Grit® files cut in any direction, and will cut Plastics, Plywood, Balsa, GRP, Carbon fibre.  Perfect for small detail work in confined areas, robust long life files.
from 9,95 EUR
Carbon Fabric 200 g/m² Plain
200 g/m² Carbon Fabric Plain (Width: 25 cm)...
Weight: 200 g/m²
Weave: Plain
Width: 25 cm
28,95 EUR

Customers who bought this product bought also the following products:

86 g/m² Glass Fabric "Silane" Twill | HP-T80E
86 g/m² Glass Fabric "Silane" Twill | HP-T80E...
Weight: 86 g/m²
Weave: Twill 2/2
Sizing: Silane
Width: 100 cm
5,65 EUR
Glass Fibre Braided Sleeve 136tex (D= 20 mm at 45°) | HP-BSE020/144
Glass Fibre Braided Sleeve 136tex (D= 20...
Material: 136tex (E-Glass)
Number of ends: 144
Diameter at 45°: 20 mm
Area of applications: 10 - 25 mm

**Offered and sold in stretched condition!**
1,95 EUR
High Performance Laminating Resin Epoxy HP-E56L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 5,50 EUR
High Performance Laminating System - Epoxy Resin | HP-E111L
High Performance Laminating System - Epoxy...
The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E110L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 26,50 EUR