Main page
»
Reinforcement Fabrics
»
Braided Sleeves / Flat Braid
»
Carbon Braided Sleeves
»
Carbon braided Sleeve 3K (D= 35 mm at 45°) | HP-BSC035/96/3

Carbon braided Sleeve 3K (D= 35 mm at 45°) | HP-BSC035/96/3
Carbon braided Sleeve 3K (D= 35 mm at 45°) | HP-BSC035/96/3
- Product No.:
- HP-BSC035/96/3
- Shipping time:
-
ca. 1-3 days (abroad may vary)
- Stock:
- 155 Meters
- Minimum order:
- 5
Sliding scale prices
- 5 Meters
- per 7,54 EUR
- 10-20 Meters
- per 6,26 EUR
- 25-45 Meters
- per 5,50 EUR
- 50-95 Meters
- per 4,91 EUR
- > 95 Meters
- per 4,41 EUR
Carbon braided Sleeve 3K (D= 35 mm at 45°) | HP-BSC035/96/3
The diameter of the braided sleeves can be varied by stretching. Ideally, the fiber angle should be between 30° and 60°. Optimal torsion and shear strengths are achieved at an angle of 45°. You can find more detailed information on our product data sheet.Material: 3K 200tex (HT-Fibre)
Number of ends: 96
Diameter at 45°: 35 mm
Area of applications: 15 - 45 mm
Angle: | 45° | stretched condition |
Width flat: | 54,00 mm | 17,00 mm |
Weight: | 27,20 g/m | 20,00 g/m |
Weight m²: | 502,80 g/m² |

Areas of applications:
Tanks, pipes, hulls, model making, boat construction, sport equipment, repairs & reinforcements.

Our carbon braided tapes are always offered and sold in stretched condition, since it is technically not possible to wrap the tapes with a fiber angle of 45°.
Due to the current export regulations it is not possible to ship this product outside the EU!
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)
This product is compatible with (for example):

TOP
The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.
Bonding, Laminating, Mould Making
Shippingtime:
ca. 1-3 days
from 6,90 EUR
Shippingtime:
ca. 1-3 days

- Glow time: up to 10 hours, depending on the amount of light stored or light intensity
- Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
- Compatible with many basic materials
- Charging by: UV-radiation, daylight, artificial light and many more
Shippingtime:
ca. 1-3 days
from 9,98 EUR
Shippingtime:
ca. 1-3 days
This product is similar to:

The Epoxy Covering Resin System HP-E30TDS is an unfilled, thixotropic combination of resin and hardener with a medium working time (pot life). For high quality Pondbuilding Coverings.
Available in several colours or clear, adjustable with color paste HP-FP to RAL.
Shippingtime:
ca. 1-3 days
from 11,90 EUR
Shippingtime:
ca. 1-3 days
Customers who bought this product bought also the following products:

A popular kit Perma-Grit's abrasive tools cut, sand and shape in any direction. They outlast sandpaper thousands of times and can be used in all the materials, listed below and more. If you are unable to cut or shape something, try Perma-Grit's range of abrasives, you will be amazed. Simple tools to use, tough and will give far better results.
from 13,95 EUR