Main page » Epoxy Resin » Mould Resin Systems » unfilled resin System » Epoxy Resin multi-purpose system 45 min (medium viscous) | HP-E45KL

Epoxy Resin multi-purpose system 45 min (medium viscous) | HP-E45KL

TOP

Epoxy Resin multi-purpose system 45 min (medium viscous) | HP-E45KL

Product No.:: HP-E45KL
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Package

quantity:

from 6,90 EUR

incl. 19% tax excl. Shipping costs

Package:

Description

Epoxy Resin for Bonding, Laminating, Mould Making (medium viscous) | HP-E45KL

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Features & Benefits

For laminating:

Good wet-out of reinforcement fibres
Cause bright, non-gluey surfaces
Cold-hardening, medium-viscous

For mould making / as tooling resin:

Usable as mould making resin (mixable with colour pigments)
For coupling-layers (with fillers)

For coating / final layer:

Cause glossy, non-gluey surfaces
Usable for repaira / refit of osmosis damages
High resistance to different chemicals
Usable for tank and pipe coating, basins, …

For bonding / gluing:

Applicable for gluing / bonding and for mixing putties (with HP-PK22 and HP-BF1).

Attention: Strong grouting must be avoided!

Technical Data

Product Properties Epoxy System HP-E45KL

Colouring: slightly yellow / clear
Mixing Ratio (by weight): 100 parts resin : 60 parts hardener
Mixing Ratio (by volume): 100 parts resin : 70 parts hardener
Mixed Viscosity: medium viscous
Working Time (pot life): 45 minutes (100g at 20°C)
Working temperature (optimum): 20 - 25 °C
Working temperature (minimum): 15 °C

Working Notes / Hazard Statements

Working notes and decision guidance for Epoxy Resins

Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.

Practical tips for epoxy resins (PDF)

Epoxy resin for boat building (PDF)

Decision guidance epoxy resins (PDF)

Hazard Statements

Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Hardener:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
Piktogramm-Gefahrenhinweis-Aetzend

This product is compatible with (for example):

86 g/m² Glass Fabric "Silane" Plain | HP-P80E...

Weight:	86 g/m²
Weave:	Plain
Sizing:	Silane
Width:	100 cm

5,65 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

Pigment paste opaque | FPN

Liquid Pigment pastes for colouring
Due to a high pigment concentration very efficient in consumption
Good colouring
Suitable for solvent free for epoxy resin and polyurethane systems

from 3,29 EUR

Bubble-free - Atomizer | HP-BEL61

BEL61 is used for the destruction of gas bubbles
Finest atomization, 1000 sprays per 100 ml container

The BEL61 is a liquid used to destroy surface bubbles in casting resins or epoxi coatings.

6,90 EUR
6,90 EUR per 100 ml

Light stabilizer / Anti-yellowing additive...

BEL91 is added as light stabilizer into ready mixed systems
Solution of functional amines

The HP-BEL91 improves anti-yellowing of epoxy and paints significant.

from 4,95 EUR

This product is similar to:

Core material - Sandwich material - approx....

HP-CORE is a high performance non-woven fabric developed specifically for the Fibre Reinforced Plastics (FRP) industry.

*Please enter below the desired quantity in m²

9,64 EUR

Acrylic Cast Resin | HP-A15GB

Low heat generation
Easy to use and odourless
Possible addition of water up to 5%
Mixable with dry colour pigments
Addition of cotton flakes to increase the viscosity
Working time (pot life): 10-20 minutes (100g at 20°C)

from 20,50 EUR

Microballoons | HP-MB2

Mixing of pressure-resistant, non-combustible, reduced-shrinking molding compounds
Mixture remains very fluid (due to spherical structure)
Creation of lightweight putties

from 3,90 EUR

Carbon Fabric 245 g/m² Twill | HP-T240/150C

245 g/m² Carbon Fabric Twill | HP-T240/120C...

Weight:	245 g/m²
Weave:	Twill 2/2
Width:	120 cm

31,95 EUR

Customers who bought this product bought also the following products:

High-Gloss Release Agent | HP-HGR5

Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
Fast drying time (per layer <5 minutes at 20°C)
Semipermanent, external release agent with good demoulding features
Minimises remains on the moulds’ surface – and at the same time no transmission to the component

instead 9,88 EUR
only from 8,89 EUR
You save 10%

Tube clip Squeezee® HP-VZ1400

The tube clip Squeezee® allows an exact dosing of the resin flow and easy disconnecting of the resin line in the vacuum infusion.

· Ideal for disconnecting all tube lines
· Exact dosing of the resin flow is possible
· Suitable for tubes up to 15 mm outer diameter
· very easy to handle

32,90 EUR

200 g/m² Carbon Fabric Plain | HP-P200C

Weight:	200 g/m²
Weave:	Plain
Width:	100 cm

27,89 EUR

Infusion System - Epoxy - Resin component...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The series is usable for
hand-laminating, too.

Vacuum Infusion, Pressure Injection

from 40,50 EUR