Subscribe to Newsletter

 
 
Bubble-free - Atomizer | HP-BEL61
Bubble-free - Atomizer | HP-BEL61
Bubble-free - Atomizer | HP-BEL61

Bubble-free - Atomizer | HP-BEL61

Product No.:
HP-BEL61-100
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
6,90 EUR
6,90 EUR per 100 ml

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Surface spray to destroy gas bubbles | HP-BEL61

Bubble Free is a liquid for destroying surface bubbles in cast resins or epoxi coatings. The surface spray is sprayed onto the surface to be treated from a distance of approx. 20 cm.
 
Technical data:
Yield: 1 - 2 sprays / 10 cm * 10 cm
Viscosity:
2 mPas (20°C), dünnflüssig
Density: 0,8 g / cm³ (20°C)
Processing temperature: 18° - 22°C

Properties and application notes:
  • Excellent destructive effect
  • ​Finest atomization, 1000 sprays per 100 ml container
  • Surface effective
  • High effectiveness
  • Fast evaporation rate

Technical Data Sheet Levelling additive HP-BEL71
 

This product is compatible with (for example):

Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR
Light stabilizer / Anti-yellowing additive | HP-BEL91
Light stabilizer / Anti-yellowing additive...
  • BEL91 is added as light stabilizer into ready mixed systems
  • Solution of functional amines

The HP-BEL91 improves anti-yellowing of epoxy and paints significant.

from 4,95 EUR
Plastic cup | HP-L1064
500 ml Plastic cup (50 pc.) | HP-L1064
Material: PP-Natur, round
Volume: 500 ml
Quantity/Package: 50 pieces per package
9,99 EUR
0,20 EUR per cup
Casting system resin E300GB
Casting System - Epoxy Resin | HP-E300GB
The Epoxy-System E300GB is an unfilled, low-viscosity combination of resin and hardener with working time (pot life) more than 300 minutes. Usable for epoxy casting of medium thickness (up to approx. 50mm* depending on surface, temperature geometries and casting quantity (volume).

Transparent, clear
 
from 25,90 EUR
Stirring Rods | 1405
Wooden Stirring Rods 20 cm | 1405
3 pieces of stirring rods made of wood for stirring of resin mixtures
  • Length 20 cm
  • Material wood
1,20 EUR
0,40 EUR per Spatula

This product is similar to:

Epoxy resin multi-purpose system 45 min (low viscous) | E45L
Multi-Purpose System (low viscous) | BM-E45L...
  • 2K epoxy resin multi-purpose system
  • Low viscous (thin)
  • Versatile use
  • 45 min pot life
  • Processing temperature from 18°C onwards


laminate-, mould making, adhesive, spatula and top coat resin system

from 10,90 EUR
Chopped glass fibre | HP-GS3
Chopped Glass Fibres 3 mm | HP-GS3
  • For an increased tensile, compressive and flexural strength
  • Mixture remains flowable
  • For moulding material
  • Reinforcement of gluing spots / adhesive beading
  • In combination with cotton flocks (HP-BF1) suitable for coupling layers in mould making
from 2,59 EUR
Epoxy resin electronic-casting compound | BM-E45GE
Epoxy resin electronic-casting compound...
  • 2K epoxy resin electro casting compound
  • Excellent casting properties
  • Low viscous (thin)
  • Pot life 45 min
  • Good light stability
Electronic casting, 45 min pot life, low viscous

from 12,90 EUR
Epoxy Priming resin HP-E80FS
Epoxy Priming Resin - Grounding - Resin...

The Epoxy System E80FS is an unfilled, low-viscosity combination of resin and hardener with high  adhesion to several surfaces.
- Primer, Adhesion Promoter and Corrosion Protection -
 

from 16,90 EUR

Customers who bought this product bought also the following products:

transparent colourant | FTP
Transparent colourant (liquid) | FTP
  • Liquid colourant for transparent colouring
  • Different colours are available
  • Due to its high colourant concentration, very efficient consumption
  • Good colouring
  • Suitable for transparent resins systems
  • Added quantity depends on desired colour intensity​
from 2,95 EUR
Light stabilizer / Anti-yellowing additive | HP-BEL91
Light stabilizer / Anti-yellowing additive...
  • BEL91 is added as light stabilizer into ready mixed systems
  • Solution of functional amines

The HP-BEL91 improves anti-yellowing of epoxy and paints significant.

from 4,95 EUR
Casting system resin E300GB
Casting System - Epoxy Resin | HP-E300GB
The Epoxy-System E300GB is an unfilled, low-viscosity combination of resin and hardener with working time (pot life) more than 300 minutes. Usable for epoxy casting of medium thickness (up to approx. 50mm* depending on surface, temperature geometries and casting quantity (volume).

Transparent, clear
 
from 25,90 EUR
High performance laminating system HP-E29L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 26,50 EUR