Main page » Additive / Fillers » Chopped Glass Fibre » Chopped Glas fibre 3mm » Chopped Glass Fibres 3 mm | HP-GS3

Chopped Glass Fibres 3 mm | HP-GS3

Mobile Preview: Chopped glass fibre | HP-GS3

Chopped Glass Fibres 3 mm | HP-GS3

Product No.:: HP-GS3
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Piece

quantity:

from 2,59 EUR

incl. 19% tax excl. Shipping costs

Piece:

Description

Chopped glass fibre 3 mm | HP-GS3

Add chopped glass fibres into polyester or epoxy resin to increase the moulds strength.

Areas of applications and features:

For an increased tensile, compressive and flexural strength
Mixture remains flowable
Reinforcement of gluing spots / adhesive beading
For moulding material
Substitutes for asbestos
In combination with cotton flocks (HP-BF1) suitable for coupling layers in mould making

For mixing in polyester or epoxy resins, increases the stability of the mould and the mixture remains flowable. Usable with or without cotton flocks. Resins added with chopped glass fibres have an increased tensile, compressive and flexural strength.

Examples for fields of applications:

Fibre and pressing masses, plastic plasters, putties, adhesives, anti corrosive coatings, replacement for asbestos, ...

Technical data:

Dosage:	Up to 10 %
Suitable for:	Epoxy and polyester resin
Bulk weight:	350 - 400 g/ltr (raw material)
Fibre length:	3 mm
Fibre thickness:	13 μm (ISO 1889)

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of Glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Spatula Set, plastic | HP-L1103

Material:	Plastic
Size:	50/75/100 + 120 mm
Colour:	Blue
Content:	4 pcs.

1,11 EUR

500 ml Plastic cup (50 pc.) | HP-L1064

Material:	PP-Natur, round
Volume:	500 ml
Quantity/Package:	50 pieces per package

9,99 EUR
0,20 EUR per cup

100 g/m² Unidirectional Carbonfabric | HP-U100/50C...

Construction:	0°
Fibre:	HT-Fibre
Weight:	100 g/m²
Width:	50 cm

13,98 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

Bubble-free - Atomizer | HP-BEL61

BEL61 is used for the destruction of gas bubbles
Finest atomization, 1000 sprays per 100 ml container

The BEL61 is a liquid used to destroy surface bubbles in casting resins or epoxi coatings.

6,90 EUR
6,90 EUR per 100 ml

This product is similar to:

Epoxy resin multi-purpose system 25 min...

Multi purpose system
Unfilled, low viscous 2-components combination of resin and hardener
Working time approx. 25 minutes
Applicable from 5°C temperature

Resin for laminate, top coat, adhesives, spatula and mould making.

from 10,90 EUR

20 mm Laminating brush | HP-L1071

Width:	20 mm
Bristle:	Black China bristle
Stalk:	Wood stalk

1,07 EUR

25 cm Paint roller | HP-L1032

Width: 25 cm
Flor: 4 mm (bevelled on both sides)
Diameter: 50 mm

8,90 EUR

Mould Covering System, black - Epoxy Resin...

The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high hardness.

Mould covering system, 30 minutes working time

from 28,90 EUR

Customers who bought this product bought also the following products:

Epoxy resin for infusion process HP-E30RI

Infusion System - Epoxy Resin | HP-E30RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 30 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 61,90 EUR

High-Gloss Release Agent | HP-HGR5

Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
Fast drying time (per layer <5 minutes at 20°C)
Semipermanent, external release agent with good demoulding features
Minimises remains on the moulds’ surface – and at the same time no transmission to the component

instead 9,88 EUR
only from 8,89 EUR
You save 10%