Main page » Epoxy Resin » Mould Resin Systems » unfilled resin System » Epoxy Resin multi-purpose system 25 min (medium viscous) | HP-E25KL

Epoxy Resin multi-purpose system 25 min (medium viscous) | HP-E25KL

Name: Epoxy Resin multi-purpose system 25 min (medium viscous) | HP-E25KL
SKU: HP-E25KL
Availability: InStock

Product No.:: HP-E25KL
Shipping time:: (abroad may vary)
Stock:: Package

quantity:

from 6,90 EUR

incl. 19% tax excl. Shipping costs

Package:

Add to wish list

Ask about product

Description

Epoxy Resin for Bonding, Laminating, Mould Making (medium viscous) | HP-E25KL

The Epoxy-System HP-E25KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with short working time (pot life). It is versatile for laminating and for bonding / gluing applications.

Applicable from 5°C temperature

Features & Benefits

For laminating:

Good wet-out of reinforcement fibres
Cause bright, non-gluey surfaces
Cold-hardening, medium-viscous, applicable from 5°C

For mould making / as tooling resin:

Usable as mould making resin (mixable with colour pigments)
For coupling-layers (with fillers)

For coating / final layer:

Cause glossy, non-gluey surfaces
Usable for repaira / refit of osmosis damages
High resistance to different chemicals
Usable for tank and pipe coating, basins, …

For bonding / gluing:

Applicable for gluing / bonding and for mixing putties (with HP-PK22 and HP-BF1).

Attention: Strong grouting must be avoided!

Technical Data

Product Properties Epoxy System HP-E25KL

Colouring: slightly yellow / clear
Mixing Ratio (by weight): 100 parts resin : 60 parts hardener
Mixing Ratio (by volume): 100 parts resin : 70 parts hardener
Mixed Viscosity: medium viscous
Working Time (pot life): 25 minutes (100g at 20°C)
Working temperature (optimum): 15 - 25 °C
Working temperature (minimum): 5 °C

Working Notes / Hazard Statements

Working notes and decision guidance for Epoxy Resins

Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.

Practical tips for epoxy resins (PDF)

Epoxy resin for boat building (PDF)

Decision guidance epoxy resins (PDF)

Hazard Statements

Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Hardener:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
Piktogramm-Gefahrenhinweis-Aetzend

This product is compatible with (for example):

Color Pastes according to RAL 350g | HP-FP...

Liquid Pigment pastes for colouring according to RAL
Due to a high pigment concentration very efficient in consumption
Good colouring
Free from any solvent or VOC
Suitable for solvent free for epoxy resin and polyurethane systems

from 14,90 EUR

Light stabilizer / Anti-yellowing additive...

BEL91 is added as light stabilizer into ready mixed systems
Solution of functional amines

The HP-BEL91 improves anti-yellowing of epoxy and paints significant.

from 4,95 EUR

86 g/m² Glass Fabric "Silane" Twill | HP-T80E...

Weight:	86 g/m²
Weave:	Twill 2/2
Sizing:	Silane
Width:	100 cm

5,65 EUR

20 mm Laminating brush | HP-L1071

Width:	20 mm
Bristle:	Black China bristle
Stalk:	Wood stalk

1,07 EUR

500 ml Plastic cup (50 pc.) | HP-L1064

Material:	PP-Natur, round
Volume:	500 ml
Quantity/Package:	50 pieces per package

9,99 EUR
0,20 EUR per cup

This product is similar to:

3D|CORE™ green 5 mm PET-Foam | HP-3DCORE-GR-5...

Thickness:	5 mm
Material:	PET 95 kg/m²
Structure:	Hexagon
Sheet size:	1015 x 405 x 5 mm
Panel weight:	ca. 195 g

12,86 EUR

Polyester resin based on ISO NPG -Resin...

Unsaturated Polyester Resin
Orthophtalic-based, pre-accelerated, high thixotropic index
Wax free, tacky for further bonds / layers
Good mechanical properties
Excellent wet-out of fiberglass, carbon and aramid fibers
LSE (Low Styrene Emission) polyester resin
Applicable for hand lay-up, spray-up and for general reinforced plastics
Contains peroxide-indicatorLimited Shipping

from 44,90 EUR

Silicone rubber | HP-SI6GB

Medium viscous mould making
High tear strength
Working time 6-8 minutes
High fillable casting resin

from 20,90 EUR

10 cm Paint roller | HP-L1034

Width: 10 cm
Flor: 4 mm
Diameter: 25 mm

2,19 EUR

Customers who bought this product bought also the following products:

28 g/m² Glass Fabric "Finish" Plain | HP-P28EF...

Weight:	28 g/m²
Weave:	Plain
Sizing:	Finish
Width:	103 cm

4,90 EUR

49 g/m² Glass Fabric "Finish" Plain | HP-P49EF...

Weight:	49 g/m²
Weave:	Plain
Sizing:	Finish
Width:	127 cm

4,19 EUR

600g/m² Unidirektional - Carbongelege SP-U600/50C

600g/m² Unidirectional-Carbon Fabric SP-U600/50C...

Structure:   0°
Fibre:           HT-Fibre/50K
Weight:          600g/m²
Width:            50cm

*Please enter below the desired quantity in m²

instead 31,50 EUR
only 15,75 EUR
You save 50%

Vacuum Flat Channel, 100 mm | HP-VZ1530

Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:

No print on the laminate
Excellent resin flow
Easy application and easy cut

2,33 EUR