Epoxy Resin multi-purpose system 45 min (medium viscous) | HP-E45KL
Epoxy Resin for Bonding, Laminating, Mould Making (medium viscous) | HP-E45KL
The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.
Features & Benefits
For laminating:
- Good wet-out of reinforcement fibres
- Cause bright, non-gluey surfaces
- Cold-hardening, medium-viscous
- Usable as mould making resin (mixable with colour pigments)
- For coupling-layers (with fillers)
- Cause glossy, non-gluey surfaces
- Usable for repaira / refit of osmosis damages
- High resistance to different chemicals
- Usable for tank and pipe coating, basins, …
- Applicable for gluing / bonding and for mixing putties (with HP-PK22 and HP-BF1).
Attention: Strong grouting must be avoided!
Product Properties Epoxy System HP-E45KL
- Colouring: slightly yellow / clear
- Mixing Ratio (by weight): 100 parts resin : 60 parts hardener
- Mixing Ratio (by volume): 100 parts resin : 70 parts hardener
- Mixed Viscosity: medium viscous
- Working Time (pot life): 45 minutes (100g at 20°C)
- Working temperature (optimum): 20 - 25 °C
- Working temperature (minimum): 15 °C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
