Main page » Reinforcement Fabrics » Carbon Fabric » Twill » 245 g/m² Carbon Fabric Twill | HP-T240C

Preview: Carbon Fabric 245 g/m² Twill | HP-T240C

245 g/m² Carbon Fabric Twill | HP-T240C

Mobile Preview: Carbon Fabric 245 g/m² Twill | HP-T240C

245 g/m² Carbon Fabric Twill | HP-T240C

Product No.:: HP-T240C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 33,69 EUR
3-4,5 m²: per 31,95 EUR
5-9,5 m²: per 29,95 EUR
10-24,5 m²: per 28,50 EUR
25-49,5 m²: per 26,60 EUR
50-99,5 m²: per 24,95 EUR
> 99,5 m²: per 23,95 EUR

33,69 EUR

incl. 19% tax excl. Shipping costs

Description

Carbon Fiber Fabric Twill | HP-T240C

Weight: 245 g/m²
Weave: Twill 2/2
Width: 100 cm

Yarn type specifications:
Warp: 6 y/cm (3K 200Tex)

Weft: 6 y/cm (3K 200Tex)

Thickness: 0,35 mm
Yarn: AS4C-GP 3K Hexcel

Areas of application:

Modelling, sport equipment making, ship and boat construction, motor sport, carbon design, aircraft construction, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 288 g/m²
Laminate thickness: 0,39 mm
Laminate weight: 528 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

** The length of the rolls may vary. Therefore it is possible that a position from 10m² consists of several rolls. **

Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

This product is compatible with (for example):

300 g/m² Triaxial Carbonfabric | HP-T300C...

Construction:	+45°/-45°/0°
Fibre:	HT-Fibre
Weight:	300 g/m²
Width:	127 cm

21,30 EUR

Core material - Sandwich material - approx....

HP-CORE is a high performance non-woven fabric developed specifically for the Fibre Reinforced Plastics (FRP) industry.

*Please enter below the desired quantity in m²

8,68 EUR

Digital Table Scale (all steel panel) 5Kg/1g | VZ3006

Digital Table Scale 5Kg/1g | HP-VZ3006

Strain Gauge Precision Technology
Capacity: up to 5kg
Readability: 1g
Display Modes: g / oz
Key with Full Function: ON/OFF/TARA/ZERO
Auto/Manual Shut-Off
Powered by AAA Battery (included)
Dimension (incl. weighing pan): 18 cm x 12 cm x 8 cm

16,65 EUR

Laminating System - Epoxy Resin | HP-E28L...

The Epoxy-System HP-E28L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 28 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR

Color Paste Metallic | HP-FMP

Suitable for dyeing solvent-free epoxy
Ideal for casting applications such as River-Tables and jewellery production
Very efficient consumption due to high pigment concentration
Contains surfactants and dispersants, compatible with many base materials
Based on exclusively colorfast pigments
High color fidelity and reproducibility

from 9,98 EUR

This product is similar to:

Epoxy Priming Resin - Grounding - Resin...

The Epoxy System E80FS is an unfilled, low-viscosity combination of resin and hardener with high adhesion to several surfaces.
- Primer, Adhesion Promoter and Corrosion Protection -

from 16,90 EUR

Aquarium & Humid Terrarium Epoxy Resin | E45T

Aquarium & Humid Terrarium - low viscosity...

Our Epoxy Resin System E45T have a low viscosity and is specially designed for the use in aquariums and terrariums.

Low viscosity for solid subsoil (oriented strand board, stone, ...)

from 13,50 EUR

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR

245 g/m² Carbon Fabric "slippage-resistant"...

Weight:	245 g/m²
Weave:	Twill 2/2
Width:	150 cm

Special item from larger industrial production, very good quality, no 2nd choice!!!
This Carbon Fabric is one-sided fixed with an EP-binder (approx. 5 - 10 g/m²).

instead 41,60 EUR
only 29,12 EUR
You save 30%

Customers who bought this product bought also the following products:

Filler System - Epoxy Resin | HP-E30S

The epoxy filler HP-E30S is a filled two component combination of resin and hardener with fine extenders.

from 23,49 EUR

Nitrile-Gloves "unpowdered"

Quality:	Nitrile (high quality & resistant)
Size:	L, XL
Colour:	Blue or White
Fit:	Two-sided portable

from 2,98 EUR

Infusion System - Epoxy - Resin component...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The series is usable for
hand-laminating, too.

Vacuum Infusion, Pressure Injection

from 40,50 EUR

Infusion System - Epoxy - Hardener component...

The hardener HP-HTE300RI allows a pot-life of 300 minutes.
Base of the series HP-E3000RI is an unfilled epoxy-resin, which is mixable with different harderners for severals applications.
The series is usable for hand-laminating, too.

Vacuum Infusion, Pressure Injection

from 16,50 EUR