Main page » Reinforcement Fabrics » Glass Filament Fabric Finish » Twill » 163 g/m² Glass filament fabric Finish Twill | HP-T163EF-SOFT

163 g/m² Glass filament fabric Finish Twill | HP-T163EF-SOFT

Name: 163 g/m² Glass filament fabric Finish Twill | HP-T163EF-SOFT
SKU: HP-T163EF-SOFT
Price: 6.55 EUR
Availability: InStock

Product No.:: HP-T163EF-SOFT
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,9 m²: per 6,55 EUR
3-4,9 m²: per 6,28 EUR
5-9,9 m²: per 6,02 EUR
10-24,9 m²: per 5,50 EUR
25-49,9 m²: per 4,97 EUR
50-99,9 m²: per 4,45 EUR
> 99,9 m²: per 3,80 EUR

6,55 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

163 g/m² Glass filament fabric Finish Twill | HP-T163EF-SOFT

New “SOFT“ Finish!! The optimized finish process makes this fabric particularly flexible and drape, also a very good impregnation properties.

Weight: 163 g/m²
Weave: Twill 2/2
Sizing: Finish (Soft, Finish)
Width: 100 cm

Yarn type specifications:
Warp: 11,8 y/cm

Weft: 12 y/cm

Areas of application:

Model making, sports equipment, boat construction, tank and mould construction, vehicle parts, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 136 g/m²
Laminate thickness: 0,18 mm
Laminate weight: 302 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR

Covering System - Gelcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and medium viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR

28 cm plastic Stirrer | HP-L1128

Colour:	Black
Material:	Plastic
Size:	28 cm incl hole and retaining hooks

0,95 EUR

Scissors "OPTIMA" | HP-L1054

Lenght:	28 cm
Blade lenght:	12 cm
Colour:	blue

7,45 EUR

Sealant Tape | HP-ST12X3/80

Material:	Butyl Rubber
Width:	12 mm
Thickness:	3 mm
Length:	15 mtr.

10,41 EUR

This product is similar to:

Polyester resin based on orthophtalic acid | HP-P21L

5 kg Polyester resin based on orthophtalic...

Unsaturated Polyester Resin
Orthophtalic-based, pre-accelerated, high thixotropic index
Wax free, tacky for further bonds / layers
Good mechanical properties
Excellent wet-out of fiberglass, carbon and aramid fibers
LSE (Low Styrene Emission) polyester resin
Applicable for hand lay-up, spray-up and for general reinforced plastics
Contains peroxide-indicatorLimited Shipping

instead 42,49 EUR
only 38,24 EUR
You save 10%
7,65 EUR per Kg

220 kg Polyester resin based on orthophtalic...

Unsaturated Polyester Resin
Orthophtalic-based, pre-accelerated, high thixotropic index
Wax free, tacky for further bonds / layers
Good mechanical properties
Excellent wet-out of fiberglass, carbon and aramid fibers
LSE (Low Styrene Emission) polyester resin
Applicable for hand lay-up, spray-up and for general reinforced plastics
Contains peroxide-indicatorLimited Shipping

on request

Customers who bought this product bought also the following products:

280 g/m² Glass Fabric "Finish" Plain | HP-P280EF...

Weight:	280 g/m²
Weave:	Plain
Sizing:	Finish
Width:	100 cm

9,14 EUR

Sanding Sponge | HP-SS

3 different grit sizes
color coding of the grit
good lifetime (washable)
grit: aluminum oxide

1,79 EUR

Cleaning and degreasing agent - Acetone...

Acetone is a solvent and is usually used to clean tools from resin, that has not yet dried completely. Furthermore it is often used for degreasing surfaces (e.g. fibre glass or carbon fibre).

Cleaning and degreasing agent

from 9,90 EUR

Radius roller | HP-RR

Aluminium radius roller are used for compressing and ventin the laminates with screw fastening incl. holder and plastic grip.

Suitable for glass fabrics

Available dimensions:
Item-No.:	Diameter:	Width:
HP-RR-13x75	13 mm	75 mm
HP-RR-25x75	25 mm	75 mm
HP-RR-25x150	25 mm	150 mm
HP-RR-50x75	50 mm	75 mm
HP-RR-50x150	50 mm	150 mm

from 9,90 EUR