Aquarium & Humid Terrarium - low viscosity - Epoxy Resin | HP-E45T
Aquarium & Humid Terrarium - low viscosity - Epoxy Resin | HP-E45T
Our Epoxy Resin Systems are specially designed for the use in aquariums and terrariums. The resin-sealed surfaces are shock-resistant, scratch-proof and bite-resistant. A barrier layer is created which isimpermeable to water and it can be cleaned and disinfected easily. Bacteria or pathogens cannot adhere to this surface.
Features & Benefits
- Good wet-out of reinforcement fibres
- Creates clear and non-sticky surfaces
- Cold-hardening
- Good strength
- Sealing of metals, wood, diverse plastics and mineral substrates
- High surface protection, very good hygiene and water barrier layer
- High impact strength
These systems are considered physiologically harmless if processing instructions are observed.
Product Properties Epoxy System E45T
- Colouring: light yellow / clear
- Mixing Ratio (by weight): 100 parts resin : 60 parts hardener
- Mixing Ratio (by volume): 100 parts resin : 66 parts hardener
- Mixed Viscosity: low viscous
- Working Time (pot life): 45 minutes (100 g at 20°C)
- Working temperature (optimum): 20 °C
- Working temperature (minimum): 15 °C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
