



49 g/m² Glass Fabric "Finish" Plain | HP-P49EF
- Product No.:
- HP-P49EF
- Shipping time:
-
ca. 1-3 days (abroad may vary)
- Stock:
- m²
- 1-2,9 m²
- per 4,19 EUR
- 3-4,9 m²
- per 3,93 EUR
- 5-9,9 m²
- per 3,67 EUR
- 10-24,9 m²
- per 3,40 EUR
- 25-49,9 m²
- per 2,88 EUR
- 50-126,9 m²
- per 2,29 EUR
- > 126,9 m²
- per 1,96 EUR
Glass Fiber Fabric Finish Plain | HP-P49EF
Weave: Plain
Sizing: Finish
Width: 127 cm
Warp: 20 y/cm (EC5-11 tex)

Areas of application:
Resin consumption: 39 g/m²
Laminate thickness: 0,05 mm
Laminate weight: 87 g/m²
► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.
Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)
Laminate Calculator
Characteristics of Glass Fabric Constructions:
Glass Fabrics are available in different constructions. The important characteristics you will find below:
![]() |
|
Twill
![]() |
|
Satin
![]() |
|
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)
This product is compatible with (for example):

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.
Bonding, Laminating, Mould Making

Plastic nobby roller are used for compressing and ventin the laminates with screw fastening incl. holder and plastic grip.
Suitable for coatings of greater areas like ponds or swimming pools
Available dimensions: | ||
---|---|---|
Item-No.: | Diameter: | Width: |
HP-L1021 | 68 mm | 24 cm |
This product is similar to:

- Consider RV23 in the calculation of the hardener quantity!
- Dosage up to 20 %
- For a lower brittleness, we recommend adding 5 %
- Overdose leads to losses of heat resistance and tensile strength
The reactive thinner RV23 is a low viscous, difunctional additive for epoxy resin systems.

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 30 minutes. The series is usable for hand-laminating too.
Vacuum Infusion, Pressure Injection

Available in several colours or clear, adjustable with color paste HP-FP to RAL.
31,27 EUR per Kg
Customers who bought this product bought also the following products:

-
For an increased tensile, compressive and flexural strength
- Mixture remains flowable
- For moulding material
- Reinforcement of gluing spots / adhesive beading
- In combination with cotton flocks (HP-BF1) suitable for coupling layers in mould making