Subscribe to Newsletter

 
 
Epoxy adhesive resin system for metal, wood, rubber, ceramics, rigid foams and many plastics
Adhesive System - Epoxy Resin | HP-E60K
Epoxy adhesive resin system for metal, wood, rubber, ceramics, rigid foams and many plastics

Adhesive System - Epoxy Resin | HP-E60K

Product No.:
HP-E60K
ca. 1-3 days ca. 1-3 days (abroad may vary)
from 10,90 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Epoxy Adhesive, performance bondings | Epoxy Resin HP-E60K

The Epoxy Adhesive HP-E60K is an unfilled combination of resin and hardener with processing time (pot life) of 60 minutes.


Features & Benefits 

  • Cold-hardening, medium viscous
  • Production of high performance bondings
  • Very good wet-out of substrate surfaces
  • Free of solvents and filling agents, if required fillers can be added (for gap-fillings etc.)
  • Bondings are resistant against oil, grease, moisture, diluted acid or lyes and several solvents
  • They adhere metal, wood, rubber, ceramic, rigid foams and many plastics.
Epoxy adhesives do not give off volatile components and therefore pressure onto the bonding while hardening is not necessary. Extensive bindings and parts that are under tension need as much pressure as there is enough contact between the parts that have to be adhered together. Extensive parts need to be fixed by the pressure.
 
Technical Data

Product Properties Epoxy System HP-E60K

  • Colouring: slightly yellow / clear
  • Mixing ratio by weight (resin : hardener): 100 : 50
  • Mixing ratio by volume (resin : hardener): 100 : 60
  • Pot life time (at 25°C): 60 minutes
  • Functional strength (100 g / 23°C): 16 h
  • Processing temperature (minimum): 15°C

Working Notes / Hazard Statements

Working notes and decision guidance for Epoxy Resins

Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.

Practical tips for epoxy resins (PDF)

Epoxy resin for boat building (PDF)

Decision guidance epoxy resins (PDF)
 

Hazard Statements

Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hazard pictograms GHS07Piktogramm-Gefahrenhinweis-Fisch

Hardener:
Danger
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
Piktogramm-Gefahrenhinweis-AetzendPiktogramm-Gefahrenhinweis-Achtung

This product is compatible with (for example):

Bubble-free - Atomizer | HP-BEL61
Bubble-free - Atomizer | HP-BEL61
  • BEL61 is used for the destruction of gas bubbles
  • Finest atomization, 1000 sprays per 100 ml container
The BEL61 is a liquid used to destroy surface bubbles in casting resins or epoxi coatings.
6,90 EUR
6,90 EUR per 100 ml
Color Pastes | HP-FPN
Set of 7 x 20 g pigment paste opaque | FPN...
  • Liquid Pigment pastes for colouring
  • Due to a high pigment concentration very efficient in consumption
  • Good colouring
  • Suitable for solvent free for epoxy resin and polyurethane systems​
20,90 EUR
Plastic cup | HP-L1069
Mixing cup 300 ml | HP-L1069
Material: hard paper with PE coating, round
Volume: 300 ml
Quantity/Package: 25 or 50 pieces per package
0,25 EUR
150 g/m² Bidiagonal carbon fabric | HP-B200C
150 g/m² Bidiagonal carbon fabric | HP-B150C...
Construction: +/-45°
Fibre: HT-Fibre
Weight: 150 g/m²
Width: 127 cm
19,64 EUR
15 mm Laminating brush | HP-L1107
15 mm Laminating brush | HP-L1107
Width: 15 mm
Bristle: Black China bristle
Stalk: Wood stalk
0,85 EUR

This product is similar to:

5 Needle Files Set HP-NF-1H
14cm Needle Files - Perma-Grit®
Unlike conventional Needle Files Perma-Grit® files cut in any direction, and will cut Plastics, Plywood, Balsa, GRP, Carbon fibre.  Perfect for small detail work in confined areas, robust long life files.
from 9,95 EUR
Carbon Fabric 93 g/m² Plain | HP-P96C
93 g/m² Carbon Fabric Plain | HP-P96C
Weight: 93 g/m²
Weave: Plain
Width: 100 cm
74,95 EUR
Drip Cap | 1406
Drip Cap with Tip (2 pcs) | 1406
  • Colour: Nature
  • Thread: 28 mm
  • Suitable for plastic bottles from 250 ml up to 1 L
  • Set of 2 plastic valves
2,90 EUR
Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LSP
Polyester resin based on ISO NPG -Resin...
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Waxed for top or finish uses
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
from 47,50 EUR

Customers who bought this product bought also the following products:

105 g/m² Peel Ply Twill (Breite: 125 cm) | HP-T105P125
105 g/m² Peel Ply Twill (Breite: 125 cm)...
Weight: 105 g/m²
Weave: Twill
Width: 125 cm
Material: Nylon 6.6
4,17 EUR
Aramidfabric | SP-T171A
170g/m² Aramid Fabric Twill 3/1 | SP-T171A...

**Special offer, from larger industrial production / 1A goods, no 2nd choice**

weight: 170g/m²
weave: X-twill 3/1
warp: 6,5 Fd/cm (127tex Kevlar® 49 T 968)
weft: 6,5 Fd/cm (127tex Kevlar® 49 T 968)
width: 127cm

*Please enter below the desired quantity in m²

instead 27,96 EUR
only 20,97 EUR
You save 25%
245g/m² carbon fabric, twill, 125cm wide | SP-T240C
245g/m² Carbon Fabric Twill SP-T240/125C...
** B-goods / slight errors in the weave setting in places **
** The running lengths of the rolls vary! It is therefore possible that an item from 10m² consists of several rolls **

weight: 245g/m²
weave: twill 2/2
width:  125cm

*Please enter below the desired quantity in m²
instead 33,70 EUR
only 23,59 EUR
You save 30%
300 g/m² Bidiagonal Carbon fabric
300 g/m² Bidirektional 0/90° Carbongelege...
Construction: 0/90°
Fibre: HT-Faser
Weight: 300 g/m²
Width: 94,50 cm
14,14 EUR